473509
11
Zoom out
Zoom in
Previous page
1/44
Next page
Instructions for Use
11
Description of the Appliance
Shelf (1)
The shelf may be placed randomly upon any of the guide slots
within the interior of the appliance. It is protected against
sliding out.
The shelf is placed upon the top four guides by lowering the
front section of the shelf downwards, the rear of the shelf is
placed upon the guide slot and the shelf is inserted in the guide
in the inclined position.
The shelf is placed upon the top four guides by lifting the front
section of the shelf upwards, the rear of the shelf is placed
upon the guide slot and the shelf is inserted in the guide in the
inclined position.
In case you may wish to remove the shelf from the appliance
lift the shelf by hand at the rear and pull it out in the opposite
procedure.
Glass shelves are protected with plastic edge frames.
Quickly perishable food should be stored on the back i.e. the
coldest part of the shelves.
Defrost Water Outlet (2)
The interior of the refrigerator is cooled with cooling plate
incorporated in the rear wall. Under the plate there is a channel
and an outlet for defrost water.
Regularly check the defrost water outlet and the channel,
because they should never be clogged (as for example with
food rests). If clogged, use a plastic straw and clean it.
Crisp tray and serving tray (3)
The tray at the bottom of the refrigerator is covered with the
serving tray. This cover protects the stored fruit and vegetables
from excessive drying.
Door Liner
The door liner consists of various shelves or holders used for
storing eggs, cheese, butter and yogurt as well as other
smaller packages, tubes, cans etc.
The lower shelf is used for storing bottles.
Illumination in the Interior of the Refrigerator
The light for illuminating the interior of the appliance is on,
when the door is opened. The operation of the light does not
depend on the position of the thermostat knob.
Operation Control
The appliance is controlled with thermostat knob, situated in
the right upper part inside the appliance.
Turn the knob from STOP (0) position towards 7 and backwards.
Temperature Selection
Higher settings on the knob (towards 7) mean lower
temperatures (colder) in all three compartments of the
appliance. Temperature in the interior of the appliance may
even drop below 0°C. Higher settings should be used only in
case higher temperature is recommended or required.
When the ambient temperature is normal, we recommend
medium setting.
Changes of the ambient temprature affect temperature in the
interior of the appliance (choose correct setting of the
thermostat knob).
In STOP (0) position the appliance does not operate (the
cooling system is switched off), yet power supply is not
interrupted (the light is on, when you open the refrigerator
door).
Temperature in the refrigerator also depends on how often
the door is opened.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor FIS-820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor FIS-820 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info