Manual Fagor FET-5112 (page 18 of 40) (English, German, French, Italian)

554737

Zoom out

Zoom in

1/40

• CLEANING THE PUMP FILTER

This lter collects the small objects you may have inadvertently left in your

clothes and prevents them from disrupting the pump’s operation.

To clean the lter, proceed as follows:

—

Open the drum doors. At the back of the drum, you will see a plastic

component (Diagram D15)

—

Release this (Diagram D16).

To do this:

- Insert a rod (a pencil or a screwdriver, for example) into the hole in the

component .

- Press down vertically with the rod, while pushing the component over

to the right until it is released from its housing .

—

Remove the component

—

Turn the drum slightly towards the front of the machine, with the doors

open (Diagram D17)

You can access the pump lter through the openings freed by removing

the plastic component .

—

Remove the lter from its housing (Diagram D17)

—

Remove the various objects it may have in it

—

Rinse it under the tap (Diagram D18)

—

Re-insert it, pushing it rmly into its housing after checking that the

housing is clean

—

Re-insert the plastic component , ensuring that it is positioned correctly

in the openings at the bottom of the drum and pushing it to the left until it is

fully engaged

(Diagram D19).

• CLEANING THE MACHINE

Important:

To clean the casing, the control panel and all the plastic parts

in general, use a sponge or a soft cloth dampened only with water

and liquid soap.

In all cases, do not use:

—

Abrasive powders

—

Metal or plastic sponges

—

Alcohol-based products (alcohol, thinners, etc.)

• CARE OF THE INTERNAL COMPONENTS

To ensure better hygiene, we recommend that you:

—

Leave the lid open for a short time after washing.

—

Clean the plastic and rubber access components to the tank pproximately

once a month using a slightly chlorinated product. Run a rinsing cycle to

remove any residue of this product.

—

Run a washing cycle at 90°C at least once a month.

• CLEANING THE PRODUCTS’ BOX

Clean the products’ box regularly.

To do this:

—

Press the bosses on each side of the box simultaneously to extract it

from its housing (Diagram D20)

—

Remove the siphons from the rear of the box and separate the box

from its front cover (Diagram D21)

—

Rinse everything under the tap (taking care to empty any excess water

remaining inside the box)

—

Ret all the box’ components, ensuring that the box section itself is

properly clipped into the cover and then re-insert the complete assembly

into its location under the machine’s lid.

• PERIODIC CHECKS

To avoid any water damage, we recommend that you regularly check the

condition of the water and drain hoses. If you notice the slightest cracking,

do not hesitate to replace the hoses with identical ones available from

the manufacturer or his After-Sales Service. For how to replace the water

supply hose, please refer to the section «CONNECTING TO THE COLD

WATER SUPPLY».

• REPLACING THE POWER SUPPLY CABLE

Warning:

For your safety, the power cable and, depending on the model,

the complete electric box and its associated cable must only be

replaced by the manufacturer’s After-Sales Service or a qualied

electrician.

5 / MAINTAINING YOUR MACHINEEN

D E

D 15

D 16

D 17 D 18

D 19

D 20

D 21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor FET-5112 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor FET-5112 Manual

Product: