456781

Fagor CIV-820 Manual

12
Zoom out
Zoom in
Previous page
1/44
Next page
Instructions for Use
12
Operation Control
The freezer is controlled with switches and thermostat button,
incorporated in the bottom section of the appliance.
Control panel
1 ON/OFF switch (green signal lamp)
2 Continued operation button (yellow signal lamp)
3 Alarm off button (red signal lamp)
ON/OFF Switch (1)
The appliance is switched on - the green light is on.
The appliance is switched off - the green light is off.
Continued operation button (2)
This switch is used to select one of the two operation modes:
continuous and automatic.
Continuous operation - the yellow light is on.
The cooling system operates continuously. This mode is
selected when you want to freeze large amounts of fresh foods
and in case you want to deep freeze already frozen foods.
Automatic operation - the yellow light is off.
The interior temperature is controlled by the thermostat which
turns the cooling system on and off.
The frequency of switching the cooling system on and off
depends on:
− the thermostat knob position (thermostat setting),
− how often you open the door; and
− ambient temperature.
Alarm off button and the red signal lamp (3)
The sound of the alarm is switched off by pressing the Alarm
Off button. The alarm goes off because of high temperature
inside the freezer (red signal lamp is on), or because of the
excessive dust collected at the condenser (red signal lamp is
off).
Consult the Section Troubleshooting Guide
Temperature Selection
When the freezer operates automatically, the interior
temperature is controlled by the thermostat.
The most suitable thermostat position is in the middle between
max (7) and min (1).
We recommend setting the thermostat on positions towards
max (7) only in case you want to accelerate cooling, as for
example before loading smaller amounts of fresh foods or
when the operation mode shall correspond to the ambient
temperature.
Thermostat settings towards min (1) help you save energy
provided that the freezer is loaded with smaller amount of
frozen foods.
Changes of the ambient temperature affects temperature in the
interior of the appliance. Choose correct setting of the
thermostat knob.
Use
Starting the empty freezer
Switch the freezer on. Sound alarm is on because of
inappropriate temperature. It may be switched off by pressing
the alarm button
.
Put the mode selection switch to the continuous operation
position. All three signal lamps are on. Place fresh food into the
freezer several hours after the red signal lamp goes off.
Freezing Fresh Foods
Proper use of the appliance, adequately packed food, correct
temperature and taking into account hygienic precautions will
substantially influence the quality of freezing the food or storing
of the frozen foodstuffs.
• Carefully select food to be frozen: it should be of adequate
quality and suitable for freezing.
• Choose correct packaging for each kind of food and pack it
correctly.
− The packaging should be air tight and well sealed
without leaking since this could cause substantial
vitamin loss and dehydration.
− Foils and bags should be soft enough to tightly wrap
around the food.
• Mark packages with following data: kind and amount of
foods and the date of loading.
• It is most important that the food is frozen as quickly as
possible. We therefore recommend the size of the package
not to be too large and to be cooled before loading into the
freezer.
• The amount of the fresh foods that can be loaded in the
freezer within 24 hours is stated on the rating plate. If the
loaded amount is too large, the quality of freezing is reduced
which affects the quality of frozen foods.
Proper freezing procedure
Freeze the food in the freezing compartment (see Section
Description of the Appliance)
• 24 hours prior freezing of fresh food switch the continued
operation button (2) to the uninterrupted operation (yellow
lamp is on). At the end of this period load fresh food into the
freezing compartment.
• After 24 hours move the frozen food to the storage
compartment of the freezer and repeat the freezing
procedure with new load if required. Fresh food should not
touch the already frozen packages.
• Approximately 24 hours after the last loading of fresh food
press the continued operation button again (2) and switch to
the automatic operation (yellow signal lamp is off).
• In case of freezing minor quantities of fresh food (1-2 kg), it
is not necessary to switch the appliance to the continued
operation mode (2).
Storage of frozen food
Store the already frozen food in the storage compartment of
the freezer. The bottom basin of the appliance is also intended
for storage purposes. Storage baskets may be removed at
random and food may be placed directly upon the cooling
shelves.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor CIV-820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CIV-820 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info