Manual Fagor CAT 44NG (page 13 of 104) (English, French, Portuguese, Spanish)

485594

Zoom out

Zoom in

1/104

Remove the water tank from the cof-

fee machine (Fig. 7).

Fill the water tank with fresh cold

water (Fig. 8).

Pour only fresh cold water in the water

tank. Never put in other liquids, e.g.

mineral water or milk.

Replace the water tank (Fig. 7). Press

the tank firmly in, to ensure that the

water tank valve opens.

If for instance, water has to be refilled

during coffee dispensing, the „Fill

water tank“ indicator (Fig. 3, k)

flashes, the display indicates «REFILL

WATER». Coffee preparation is inter-

rupted. Fill the water tank!

To always be sure of a rich coffee, with

a full aroma, you should:

• change the water in the water tank

daily,

• wash the water tank at least once per

week in normal washing-up water (not

in the dishwasher). Then rinse with

fresh water.

5.3 Switching on for the first time

When you place the machine in use for

the first time, the automatic switching

on process only continues if you have

selected the desired language.

Switch on the machine with the „On/

Off“ key (Fig. 3, h) (Fig. 9). The red

indicator light comes on

The machine is set at the factory to the

display language «ENGLISH».

To select a different language, proceed

with „Setting language“ page 45.

If you wish to select «ENGLISH»,

press the „OK“ key (Fig. 3, g). English is

now programmed.

After programming the display returns

automatically in the main menu to the

menu point «LANGUAGE».

To start the switching on process, press

the „Menu“ key (Fig. 3, f) or wait

ca. 30 sec. For the machine to auto-

matically start with the switching on

process.

The display briefly indicates «Xperta».

The machine now heats up (display

indication «UNIT HEATS») and sub-

sequently performs a rinsing cycle (dis-

play indication «UNIT RINSES»). On

completion of the rinsing cycle, the

machine is ready for use. The display

indication now appears according to

the basic setting.

5.4 Switching on the machine

Each time before switching on, make

sure there is water in the water tank

and replenish if necessary. The machine

requires water for the automatic rins-

ing cycles with each switching on and

switching off process.

Switch the machine on with the „On/

Off“ key (Fig. 3, h) (Fig. 9). The red

indicator light comes on, the display

indicates briefly «Xperta».

Immediately after being switched on

the machine runs through a set-up

cycle. The noises occurring are per-

fectly normal.

During the heating-up phase (ca.

60 seconds) the „Coffee machine heat-

ing“ indicator (Fig. 3, i) flashes (dis-

play indication «UNIT HEATS»).

After the operating temperature has

been reached, the coffee machine car-

ries out an automatic rinsing cycle.

(display indication «UNIT RINSES»).

The water flows into the drip tray. The

„Unit heats“ indicator (Fig. 3, i) lights

continuously.

The coffee machine is now ready to

use. The indication shown in the dis-

play depends on the last selected cof-

fee mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor CAT 44NG Manual

Product: