485594

Fagor CAT 44NG Manual

12
Zoom out
Zoom in
Previous page
1/104
Next page
4 Overview of the menu
points
Below is an overview of the menu
points in which you can change and
save the machine parameters which are
preset at the factory and also start
programs and call up information. You
will find detailed information on this in
the further chapters of these operating
instructions.
•Menu «LANGUAGE»
Display language; Several languages
are available for selection.
Factory setting: «ENGLISH».
•Menu «TEMPERATURE»
Programmable coffee temperature
between 1 (moderately warm) to 5
(extra hot).
Factory setting: 3 (normal).
•Menu «SHUT OFF TIME»
Programmable switch-off time
between 1 to 5 hours.
Factory setting: 1h (1 hours).
•Menu «WATERHARDNESS»
Programmable hardness level between
1 (soft) and 4 (very hard).
Factory setting: 4.
• Menu «CLEAN»
Start the cleaning program.
• Menu «DESCALE»
Start the descaling program.
• Menu «RESET»
Reset the changed parameter settings
to the factory settings.
• Menu «INFO»
Retrieve the number of cups of coffee
dispensed and the cup measure for
each cup size.
5 Before using for the first
time
5.1 Setting Up and Connecting the
Coffee Machine
Place machine on a suitable horizontal,
stable, unheated and water-resistant
surface. Ensure there is good air circu-
lation.
Important! If the coffee machine is
brought into a warm room from a cold
environment, wait about two hours
before switching on!
We advise you to place the coffee
machine on a suitable mat to prevent
damage being caused by spray and
splashes.
Hold the bean container with the
marking at the „Unlock container“
position and set it in place (Fig. 4).
The bottom opening of the bean con-
tainer must be closed (Fig. 4,a), if it is
not closed (Fig. 4,b), insert the tip of a
ballpoint pen in the small oval hole
(arrow) of the black ring with the
marking „TOP“ and turn opening clock-
wise as far as the stop.
Now turn the bean container anti-
clockwise to the position „Coffee
beans“ (Fig. 10) or further on to
the position „Powder“ (Fig. 14).
Push the drip tray in, until it engages
on the right under the water tank
(Fig. 5).
Plug the coffee machine into an
earthed mains socket. Do not use a
socket that is not earthed!
If you do not need the full length of
the mains lead, open the cable com-
partment on the back of the coffee
machine, and stow away the unused
lead (Fig. 6).
5.2 Filling with Water
Each time before switching on the cof-
fee machine, check that there is water
in the water tank and refill if necessary.
The coffee machine requires water for
the automatic rinsing processes each
time the machine is switched on or off.
GB
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor CAT 44NG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info