Manual Fagor B-850A (page 9 of 49) (English, German, French, Polish, Portuguese, Spanish)

554752

Zoom out

Zoom in

1/49

NOTE: Do not use the blender with food at

temperatures exceeding 100ºC.

Operating the whisk

Push the whisk into the blender coupling

until it locks (Fig. 4). Afterwards, connect

it to the body of the blender (Fig. 5). Place

the blender in the container, connect the

plug to the mains and push the on/off

switch to begin beating. Use the speed

control to select the speed.

You may use the jug (12) or another

container for whisking. The contents of the

bowl can be stored using the corresponding

lid.

NOTE: Do not use the whisk with food at

temperatures exceeding 80ºC.

Operating the chopper

The chopper may be used with dried fruits,

herbs, hard-boiled eggs, dry bread, etc.

Fit the chopper blade (11) on the bowl’s

shaft. Place the ingredients to be chopped

into the chopping bowl.

Fit the chopper lid (9) onto the bowl,

turning it anticlockwise (Fig. 3).

Fit the motor body (2) onto the chopper lid

(9) turning it anticlockwise until it fits firmly

into place (Fig. 3).

Insert the plug into a mains socket and

push the on/off switch. Use the speed

control (6) to select a speed. Once you

have finished chopping, make sure that

you remove the blade from the bowl before

emptying out the contents.

Once you have finished chopping, you can

store the contents of the bowl by using

the multi-purpose bowl lid (14) to seal it

hermetically.

NOTE: Do not use the chopper with food

at temperatures exceeding 80ºC.

Wall mounting

Disconnect the blender and unplug it

from the mains before carrying out any

maintenance or cleaning. Wash all the

accessories immediately after use in order

to prolong their useful life. Take care when

handling the blades, as they are very sharp

and keep them out of the reach of children.

The bowls (10 and 12) and the egg whisk

(8) are dishwasher safe. The remaining

•

Before connecting the blender, ensure

that the mixer base is correctly fitted to

the appliance.

•

Do not use or place any part of the

blender on or near to hot surfaces (gas

or electric hotplates or ovens).

•

This appliance should not be used

by physically, sensorially or mentally

handicapped people or people without

experience or knowledge of it (including

children), unless they are supervised or

instructed in the use of the appliance by

a person responsible for their safety.

•

Children should be watched to ensure

they do not play with the appliance.

•

For greater protection, we recommend

installing a residual current device (RCD)

with an operational residual current not

exceeding 30 mA. Ask your installer for

advice.

4. OPERATION

Preparing for use

This blender is designed to process small

quantities of foodstuff and should not be

used for any other purpose.

Before using for the first time, clean the

casing of the motor with a damp cloth.

Wash the shaft and the blade in hot, soapy

water; do not immerse the upper part of

the shaft. Dry all the pieces thoroughly.

IMPORTANT: Before fitting or removing

any of the parts of this blender, unplug it

from the mains.

Operating the blender

The blender is suitable for processing

light foodstuffs, such as preparing sauces,

soups, mayonnaise or purées.

Fit the accessory that you are going to use

to the motor casing, turning it in an anti-

clockwise direction until it is properly and

securely fitted.

Once the mixer base is fitted (3), plug the

blender into the mains. Place the food to

be processed in a suitable container and

place the blender in the position shown in

Figure 2. Select the speed by turning the

speed control (6). Then push the on/off

switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor B-850A in the language / languages: English, German, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor B-850A Manual

Product: