554752
8
Zoom out
Zoom in
Previous page
1/49
Next page
7
1. DESCRIPTION OF THE BLENDER
(Fig. 1)
1. On/off switch
2. Motor casing
3. Mixer base
4. Blade
5. Plug cable
6. Speed control
7. Whisk coupling
8. Whisk
9. Chopper lid
10. Chopper bowl
11. Chopper blade
12. Graduated jug
13. Multi-purpose jug lid
14. Multi-purpose bowl lid
2. TECHNICAL DATA
B-850A: 800 W
Voltage: 220-240V~50/60Hz
3. SAFETY WARNINGS
Please read this manual carefully
before using the blender for the first
time and keep it handy for any later
consultation. This will ensure that
you obtain the best results with the
maximum safety.
Before using the blender check that
the mains voltage is the same as that
shown on the blender.
If the electricity socket and the blender
plug are incompatible, change the
socket for a suitable one by contracting
a professionally qualified electrician.
We do not advise you to use adapters,
plugs or extension cables. If such a
device is indispensable, use only single
or multiple adapters and extension
cables that comply with current safety
standards, taking care not to surpass
the capacity shown on the adapter and/
or the extension cable.
After unpacking, check that the blender
is in a perfect condition; if in doubt,
contact the nearest Service Centre.
The packaging (plastic bags,
polystyrene foam, etc.) should not be
left within reach of children, as it is a
potential source of danger.
This blender should be employed solely
for domestic use. Use for any other
purpose is considered inadequate and
dangerous.
In the event of the blender breaking
down or malfunctioning, switch it off
and do not attempt to repair it.
If the blender needs repairing, only
use a Service Centre authorised by the
manufacturer and request that original
spares are used. If this advice is not
followed, the safety of the blender may
be compromised.
Do not change the cable. If it is broken
or needs to be changed, contact a
Service Centre authorised by the
manufacturer. Do not use the blender
when the cable or plug is damaged.
The manufacturer will not be liable
for any damage that may arise from
inappropriate, erroneous or improper
use or from repairs carried out by
unqualified persons.
When using any electrical appliance,
certain fundamental rules must be
followed.
ESPECIALLY
Do not touch or pull the cable with wet
or damp hands or feet.
To prevent electric shocks, do not
immerse the appliance or the cable or
the plug in water or put it under the tap.
Do not touch the blade whilst the
blender is in operation.
The whisk should be fitted or removed
only when the appliance is unplugged.
Do not allow the cable to hang over the
edge of a table or work-surface or to
come into contact with hot surfaces.
Do not pull the cable to unplug the
appliance.
Unplug the blender when it is not in
use, before fitting or removing the mixer
base and before cleaning it.
Do not allow children to use the
appliance.
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor B-850A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor B-850A in the language / languages: English, German, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info