Manual Fagor 6H-760AX (page 23 of 82) (English, German, Dutch, French, Portuguese, Spanish)

485514

Zoom out

Zoom in

1/82

english

3.3 Self-cleaning rough-walled models. On

these models, the rear plate and side panels

are covered with a self-cleaning enamel

that removes the grease while the oven is

functioning. The side panels are reversible,

doubling the lifetime of the coating.

If the panels are not performing the self-

cleaning process sufﬁ ciently, they will need

regenerating. To do this, remove all the

accessories and utensils from the inside of

the oven. Thoroughly clean the oven surfaces

that are not self-cleaning. Select the

function.

Set the temperature to 250ºC and set the

time between 30 and 60 minutes, depending

on how dirty the oven is.

When the cleaning programme ends and

the oven has cooled down, wipe the self-

cleaning elements with a damp sponge. They

will then be totally functional again.

Pyrolytic ovens

3.4 Pyrolysis cleaning.

• The cleaning process consists of the dirt

being burnt at high temperatures.

• The smoke and smells are eliminated by a

catalyser.

• There is no need to wait until the oven has

accumulated a large amount of grease to

perform the cleaning process.

• After pyrolysis, when the oven has cooled

down, wipe it with a damp cloth to remove

the white ash residue.

• Before starting the pyrolysis process,

take all the accessories out of the oven,

including the cooking accessories and the

telescopic runners.

• If any substances are stuck to the inside of

the oven due to spill-overs, remove them

before carrying out the pyrolysis process

as they could catch ﬁ re or give off large

amounts of smoke.

• During the pyrolysis process the surfaces

become hotter than during normal use.

Keep children away from the oven.

Depending on how dirty the oven is, you can

choose between two types of pyrolysis.

Pyrolysis

: This type of pyrolysis should

only be used when the oven is very dirty. The

cleaning process takes 2 hours. To activate

it, turn the function selector dial

(3.4.1).

Note: Pyrolysis cleaning is possible with this

option, with the enamelled tray accessory.

Place it at level 2. First remove the excess

grease accumulated.

ECO pyrolysis

: The cleaning process

takes 1 hour 30 minutes. To activate it, turn

the function selector to (3.4.2).

Note: The time and temperature parameters

are set parameters and cannot be altered.

When the process begins, the oven reaches

very high temperatures, the door safety lock

is activated and the pilot light beside the

symbol comes on (3.4.3). When the oven has

cooled down, the pilot light switches off and

the door can be opened.

3.5 Delayed pyrolysis. You can programme the

pyrolysis end time. Turn the function selector

dial and select or (3.5.1). Press

(3.5.2) or (3.5.3) until begins to

ﬂ ash. Adjust the pyrolysis end time by turning

the time selector dial (3.5.4, 3.5.5).

3.6 Cleaning the inside walls. Take out the side

runners and clean off any grease or ash that

has been left after the cleaning processes.

Depending on the models, the side runners

are ﬁ xed in two ways, either without a

support (3.6.1, 3.6.2) or with a support

(3.6.4, 3.6.5). When you have removed them,

use a damp cloth to clean the side walls

(3.6.3, 3.6.6). When you have cleaned the

oven walls, replace the runners. If your oven

has a fold-down grill, pull upwards and press

to fold it down (3.6.7) and clean the top wall

with a damp cloth (3.6.8).

3.7 Cleaning the glass.

Cleaning the outside of the glass: Use a

soft cloth soaked in a glass cleaning product.

Cleaning the inside of the glass: If the

inside of the glass is dirty, you can remove it

for cleaning.

When the oven has cooled down, open

the door as far as it will go (3.7.1) and ﬁ x

it in place with the red stops supplied in

the accessory bag (3.7.2). Insert the two

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor 6H-760AX in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor 6H-760AX Manual

Product: