Manual Fagor 3FH 4GLS TX NAT (page 32 of 44) (English, German, Dutch, French, Italian, Portuguese, Spanish)

76539

Zoom out

Zoom in

1/44

IGBF

Gas connection

(Fig. 5) Connect the

appliance to the gas

cylinder or to the install-

ation according to the

prescribed standards in

force, and ensure

beforehand, that the

appliance matches the

type of gas available.

Otherwise, see

"Adaptation to various

types of gas".

Furthermore, check that

the feed pressure falls

within the values

described on the table:

"User chacteristics".

Rigid/semi rigid metal

connection

Carry out the connection

with fittings and metal

pipes (even flexible

pipes) so as to obtain

counter stress the inner

parts of the appliance.

N.B. - when the instal-

lation has been carried

out, check the perfect

sealing of the entire

connection system, by

using a soapy solution.

Electrical

connection

(Fig. 6) Prior to

carrying out the

electrical connection,

please ensure that:

• the plant characteris-

tics are such as to fol-

low what is indicated

on the matrix plate

placed at the bottom of

the working area;

Collegamento gas

(Fig. 5) Collegare

l'apparecchiatura alla

bombola o all'impianto

secondo le prescrizioni

delle norme in vigore

accertandosi

preventivamente che l'ap-

parecchiatura sia

predisposta al tipo di gas

disponibile. In caso

contrario vedi: "Adatta-

mento a diverso tipo di

gas". Verificare inoltre che

la pressione di alimen-

tazione rientri nei valori

riportati nella tabella: "Ca-

ratteristiche utilizzatori".

Allacciamento metallico

rigido/semirigido

Eseguire l'allacciamento

con raccordi e tubi me-

tallici (anche flessibili) in

modo da non provocare

sollecitazioni agli organi

interni all'apparecchio.

N.B. - Ad installazione

ultimata controllare, con

una soluzione saponosa,

la perfetta tenuta di tutto

il sistema di

collegamento.

Collegamento elettrico

(Fig. 6) Prima di effettuare

l’allacciamento elettrico ac-

certarsi che:

• le caratteristiche del-

l’impianto siano tali da

soddisfare quanto indi-

cato sulla targa matrico-

la applicata sul fondo

del piano;

Connexion gaz

(Fig. 5) Effectuer la con-

nexion de l’appareil à la

bouteille ou à l’instal-

lation selon les prescrip-

tions des normes en vi-

gueur s’assurant à

l’avance que l’appareil

est reglé pour le type de

gaz disponible. En cas

contraire voir: “Adapta-

tion à un type de gaz

différent”.

Verifier aussi que la

pression d’alimentation

correspond aux valeurs

du tableau: “Caractéri-

stiques utilisateurs”.

Branchement métallique

rigide/semirigide

Effectuer le branchement

avec des raccords à con-

duits métalliques (meme

flexibles) de façon à ne pas

provoquer de contraintes

aux organes internes à l’ap-

pareil.

N.B.: - Quand l’installation

est terminée, controler,

avec une solution savon-

neuse, la parfaite eton-

cheité de tout le système de

branchement.

Branchement

électrique

(Fig. 6) Avant d’effectuer

le branchement élec-

trique, s’assurer que:

• la tension de l’installa-

tion électrique corre-

spond au voltage indi-

qué sur la plaque si-

gnalétique appliquée

au fond du plan;

Fig. 5 - Abb. 5 - Afb. 5

ISO 7/1

ISO 228/1 (FR)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor 3FH 4GLS TX NAT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor 3FH 4GLS TX NAT Manual

Product: