525629

Faber Wirdum 670 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
9 < < < <
UK IRL
2.4 Assembly of the Surround
• Establish the central point of the fireplace and mark this on the backing wall.
• Establish the distance between the heater and the backing wall.
• If the backing wall is not level, you can fill it later.
• Lay the hearth so that it is level in all directions (from front to rear and left to
right).
• Install the heater in terms of its heating function (see instructions supplied with the
appliance).
• Put the left- and right-hand uprights/sidepieces in position. These have already
been glued together. They should fit on the left- and right-hand side of the hearth.
The heater must be clear of the fireplace to allow for expansion and contraction
with heat. Any gaps can be sealed with a ceramic rope or similar.
• Fill the space between the uprights and the backing wall with brickwork or
Promatec, to allow further assembly. The uprights may be attached to this
structure. The structure must also be able to absorb pressure at right angles onto
the backing wall. We therefore recommend a brickwork structure.
• Saw the filler pieces to the right size. The size depends upon the way in which the
hearth is fitted in relation to the fireplace.
• The components may be fastened together using acid-free silicone paste or two-
component marble adhesive. Silicone paste takes longer to set, and so gives you
more time to match the pieces exactly. It is also easier to remove (for example,
using fishing line), if the pieces need to be disassembled.
• After this, you can fill the seams with the special coloured fitting kit.
• Left-over filler pieces can be stored in the upper section.
• Check that all the connections are gas-tight and test the operation of the
appliance.
• Add the finishing touches to the fireplace.
2.5 Cleaning and maintenance
Clean the fireplace using a dry non-scratch cloth or a vacuum cleaner. Do not use cleaning
agents.
Be careful! The use of cleaning agents may cause discoloration of the stone. Also be
careful when placing vases or flower pots on the fireplace.
If you do wish to use a cleaning agent, consult your retailer first. Your retailer can advise
about special cleaners for natural stone.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Wirdum 670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Wirdum 670 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info