Manual Faber Wirdum 670 (page 9 of 28) (English, German, Dutch, French)

525629

Zoom out

Zoom in

1/28

> > > > 8

UK IRL

2.3 PREPARATION

The heater can be installed in a range of positions in relation to the fireplace:

• The heater can be installed immediately behind the fireplace. In this case, the back

of the fireplace is the front of the heater

• The heater can be installed further behind the fireplace. For example, 8 cm if the

mantle or column is made of Durox blocks or stones. The rear of the fireplace is 8

cm from the front of the heater. This means that you must order wider filler pieces

in order to bring the rear of the fireplace or uprights flush with the heater

• The heater can be installed in the fireplace. In this case, it is important to know

how far inside the fireplace the heater is installed, since different filler pieces will

be needed. The location of the heater is in turn dependent upon the location of this

heater's smoke outlet or flue and the thickness of the mantle

• When installing the natural stone fireplace, always make sure that the base is level

(preferably, perfectly horizontal), clean and, above all, stable.

• Carefully remove the fireplace from the wooden crate in which it is delivered.

• Check that all the parts supplied in the crate are complete and undamaged. Lay

them out in a safe place, so that you have a clear idea of what the various parts

are.

• As far as possible, measure the dimensions using the drawing of the fireplace (see

Appendices).

• Smooth the floor using a suitable screed. Be careful with limestone fireplaces, you

may have to seal the hearth or lay plastic sheet underneath to reduce the risk of

staining. Grey cement will stain the natural stone, use only white cement. When

using Knauff (for example, to insert a plate), blistering may occur in some dark

types of natural stone. An alternative is to apply a decelerator to the plaster.

• With a parquet floor, it is advisable to cut away the parquet to the size of the

hearth, less 2 cm (left, right and front). If the parquet has not yet been fitted, you

can place the hearth above it, so that the parquet can be fitted approximately 2

cm underneath.

• We recommend that you first conduct a 'dry run' of the fireplace assembly. Among

other things, this will allow you to see how the various parts fit together.

• It is also recommended that you fit the fireplace first and then, if necessary,

plaster around it.

• If necessary, you can smooth out the fireplace components using stainless steel

rings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber Wirdum 670 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber Wirdum 670 Manual

Product: