461211
10
Zoom out
Zoom in
Previous page
1/20
Next page
9 < < < <
UK IRL
2.2.3 Mainburner adjustment
To adjust the flame height turn rotary knob B between the
(off) position and (large
flame) position
2.3 Remote control (optional)
This version of the remote control is only meant to adjust the height of the flames. It only
functions when the pilot burner is ignited and knob A is in the
(large flame) position.
Therefore it isn’t possible to ignite the pilot flame with the remote control or to extinguish
the pilot flame. The radio-frequency remote control is intended for fireplaces installed in
a domestic setting in all EU countries except Austria, Denmark, Finland and Greece.
2.3.1 Transmission code
The transmission code of the remote control is already set at the factory and can not be
adjusted by the customer.
Adjust the mainburner
First always ignite the pilot light (see 2.1.1 pilot ignition) and turn the rotary knob to the
(large flame) position.
Adjust the fire as desired with the buttons at the remote control (see figure 2.2) :
use the
button to raise the flames
use the
button to lower the flames
2.4 Battery replacement transmitter
remove the cover on the back of the remote control to access the battery
compartment
carefully remove the batteries. Pay attention not to pull the wires
replace with one alkaline 9V MN1604 or 6LR61 battery
replace the cover
2.5 Cleaning and service instructions
Turn off the fire and allow it to cool down before commencing cleaning.
It is recommended that the fire is inspected/serviced, by a competent person at
least once a year.
To maintain the finish on the trim wipe with soft damp cloth only. Do not use
abrasive cleaners, polish or solvents as these can damage the surface finish.
In case of a B1 appliance always sweep the flue at least once a year
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Silva at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Silva in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info