Manual Faber Silva (page 9 of 20) (English, German, Dutch, French)

461211

Zoom out

Zoom in

1/20

8 < < < <

UK IRL

2.2 (Manual)control

Depending on the model, the gas control block is positioned either:

• behind a stainless steel door on the underside of the appliance

• mounted in the middle of the floor plate of the appliance

• behind the frame (accessible by tilting the frame upwards)

These appliances are fitted with a manual GV36 gas control (see fig.2.1) that optionally

can be adjusted with a G30 remote control.

The pilot light always has to be lit before the main burner can be used. Rotary knob A

functions as a main valve and has to be used to lit the pilot light. Use rotary knob B to

adjust the height of the flames.

Warning! When the pilot extinguishes, for whatever reason, you should wait at least 5

minutes before trying again. Possible causes of pilot extinguish are:

• operation error

• interference of the safety device

• failure in the pilot flame system

Contact a qualified installer when the appliance extinguishes regularly.

2.2.1 Pilot ignition

To ignite the pilot light:

• simultaneously press and turn rotary knob A anti-clockwise to the

(small flame)

position at the

(spark) position a click will be heard and the piezo-electric

element starts to ignite

• hold the knob in this position for some seconds to clear the air from the pipe and

allow gas to reach the pilot burner

• if the pilot light does not light return to the

(stop) position and restart

• hold the knob for about ten seconds after the pilot light ignites

• turn the knob anti clockwise to the

(large flame) position to allow the main

burner to be ignited (see main burner ignition)

2.2.2 Pilot extinguish

To extinguish the pilot light:

• first turn rotary knob B clockwise till the (off) position

• turn rotary knob A clockwise to the

(small flame) position

• simultaneously press and turn rotary knob A clockwise to the

(off) position

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber Silva in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber Silva Manual

Product: