525643

Faber Farum Manual

44
Zoom out
Zoom in
Previous page
1/64
Next page
43 < < < <
replacement of the batteries and
adjusting the receiver for initial use.
Hand over to the client:
Installation manual
User’s manual
Imitation logs instruction card
Annual maintenance
6.9 Service and cleaning:
Check and clean if necessary after
checking:
o The pilot light
o The burner
o The combustion chamber
o The glass
o The logs for possible fractures
o The outlet
6.9.1 Replace:
o If necessary the
chips/embers.
6.9.2 Cleaning the glass
Most of the deposits can be removed with a
dry cloth. You can use ceramic hob cleaner to
clean the glass.
Note: prevent fingerprints on the glass. these
will be burned into it once the appliance is
used and cannot be removed anymore!
Carry-out the check-up according to the
instructions in chapter 7 “checking the
installation”
6.10 Conversion to a different type of
gas (e.g. propane)
This can only be done by installing the proper
burner unit. for this purpose get in touch with
your supplier.
Always mention the type and serial number of
the appliance when ordering.
6.11 Calculation of flue system
The possibilities for the lengths of flue pipes
and the possible restrictors have been
recorded in a table (see chapter 12.) This
table works with a vertical and a horizontal
length.
To define the vertical length all
lengths of flue pipes in a vertical
direction should be added up.
- The roof terminal always
counts as 1 metre.
To define the horizontal length all
lengths of flue pipes in a horizontal
direction should be added up.
- every 90° bend in the
horizontal part counts as 2
metres.
- every 45° bend in the
horizontal part counts as 1
metre.
- Turns from vertical to
horizontal or vice versa are
not reckoned in the
calculation.
- The wall terminal always
counts as 1 metre.
If there is transit under 45° then the real
vertical and horizontal lengths should be
calculated.
6.11.1 Points of particular interest:
You should never start with a cut-
down pipe from the appliance.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Faber Farum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Faber Farum in the language / languages: English, German, Dutch, Danish, Norwegian as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info