811806
14
Zoom out
Zoom in
Previous page
1/40
Next page
A
B
14 ENGLISH
TA ADDITIonAl THErmosTAT (oPTIonAl)
The appliance is able to control the room temperature through an additional thermostat (optional).
After ignition (by pressing key 1 or in chrono mode), the stove will work to reach the set value on the thermostat, displaying WORK (closed
contact) on the screen. The on-board ambient probe will automatically be ignored.
InsTAllATIon mUsT BE PErFormED By qUAlIFIED sTAFF AnD/or THE mAnUFACTUrEr's sErvICE TECHnICIAns
TO INSTALL AND ACTIVATE:
A mechanical or digital thermostat is required.
Remove the plug from the socket.
Using the image to the side as a guide, connect the two thermostat wires (clean contact - no 230 V!)
to the respective terminals at the back of the machine.
Connect the power to the stove again.
The stove is now correctly congured.
It will work by checking the external additional thermostat based on the TA function.
OPERATION IN AIR DUCTING WITH NTC PROBE 10K OPTIONAL
SET congured to OFF
Set the desired temperature ( from 7 to 37 °C)
The air ducting motor will remain o unless the fumes temperature exceeds the
normal operating temperatures
SET congured to AUTO
Set the desired temperature ( from 7 to 37 °C)
Once the specic activation threshold has been reached and exceeded, at temperature
to be satised the air ducting motor will follow the stove settings.
When the temperature set in TEMPERATURE is reached, the air ducting motor will
switch OFF and switch on again when there is a new request.
SET congured to COMFORT
Set the desired temperature ( from 7 to 37 °C)
Once the specic activation threshold has been reached and exceeded, at temperature
to be satised the air ducting motor will follow the stove settings but at a lower speed
than in SET AUTO for increased acoustic/ambient comfort.
When the temperature set in TEMPERATURE is reached, the air ducting motor will
switch o and switch on again when there is a new request.
SAMe OPerAting SettingS FOr Air ducting 2 MOtOr
J
For CorrECT oPErATIon sET THE AmBIEnT sET THErmosTAT To low-TA
BUlB THErmosTAT
rEACTIvATIon
The gure shows the position of the hopper safety
thermostat (A).
It is recommended to contact the qualied
technician if one of the thermostats is triggered, so
as to verify the cause.
FUsE
If the stove is not powered, have the condition of
the fuse (B) checked by a qualied technician.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame TEOREMA plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame TEOREMA plus in the language / languages: English as an attachment in your email.

The manual is 8.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame TEOREMA plus

Extraflame TEOREMA plus User Manual - German - 40 pages

Extraflame TEOREMA plus User Manual - Dutch - 40 pages

Extraflame TEOREMA plus User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info