811775
24
Zoom out
Zoom in
Previous page
1/40
Next page
24 ENGLISH
EASY SETUP
The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change while keeping the
quality of the pellet unchanged. By using the EASY SETUP function, it is possible to change the calibration of the volumetric weight by
increasing or decreasing the pre-set values.
In the stove program, the available values go from “– 3” to “+ 3”; all stoves are calibrated during production with the optimal value which is 0.
If you notice an excessive deposit on the burning pot, access the EASY SETUP program and lower the value to “- 1”; then wait until the next
day and if there is no improvement, decrease again, to a maximum of “- 3”.
Instead, if it is necessary to increase the calibration of the volumetric weight of the pellet, go from the factory value “0” to “+ 1, + 2, + 3” as
required.
EXCESSIVE PELLET DEPOSIT IN THE BURN POT NORMAL OPERATION MINIMUM PELLET DEPOSIT IN THE BURN POT
-3 -2 -1 0 +1 +2 +3
THIRD
DECREASE
RANGE IF THE
FIRST TWO ARE
NOT ENOUGH
SECOND
DECREASE
RANGE IF THE
FIRST IS NOT
ENOUGH
FIRST DECREASE
RANGE (TEST
FOR 1 DAY)
OPTIMAL FACTORY
VALUE
FIRST INCREASE
RANGE
SECOND
INCREASE
RANGE IF THE
FIRST IS NOT
ENOUGH
THIRD INCREASE
RANGE IF THE
FIRST TWO ARE
NOT ENOUGH
CONTROLS PROCEDURE
Press key 6.
Press key 3 until EASY SETUP appears and conrm by pressing key 6.
Use keys 4 and 5 to set the range.
Press key 6 to conrm and key 1 to return to the previous menus to the initial state.
N.B.: IF THIS CALIBRATION DOES NOT SOLVE THE PELLET DEPOSIT IN THE BURN POT, PLEASE CONTACT YOUR LOCAL AFTER
SALES CENTRE.
VENTILATION
The menu allows you to enable and adjust the speed (-2, -1, 0, +1, +2) of the front fan.
ENABLING CONTROLS PROCEDURE
Press key 6.
Press 3 until VENTILATION appears and conrm by pressing 6.
Conrm ENABLING by pressing the 6 key.
Use keys 4 -5 to enable (ON) or disable (OFF) and conrm by pressing 6.
Press 1 to return to the previous menus to the initial state.
SPEED CONTROLS PROCEDURE
Press key 6.
Press 3 until VENTILATION appears and conrm by pressing 6.
Keep pressing 3 until SPEED appears and conrm by pressing 6.
Use keys 4 -5 to adjust the speed (-2, -1, 0, +1, +2) and conrm by pressing 6.
Press 1 to return to the previous menus to the initial state.
SET THERMOSTAT controls procedure
Press key 6.
Press 3 until VENTILATION appears and conrm by pressing key 6.
Keep pressing 3 until SET THERMOSTAT appears and conrm by pressing 6.
Use keys 4 5 to adjust the room temperature (7°C - 37°C) and conrm by pressing 6.
Press 1 to return to the previous menus to the initial state.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame MARINA IDRO H11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame MARINA IDRO H11 in the language / languages: English as an attachment in your email.

The manual is 13.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame MARINA IDRO H11

Extraflame MARINA IDRO H11 User Manual - German - 40 pages

Extraflame MARINA IDRO H11 User Manual - Dutch - 40 pages

Extraflame MARINA IDRO H11 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info