811772
33
Zoom out
Zoom in
Previous page
1/40
Next page
33
| ENGLISH
ADJUSTING LANGUAGE
• see chapter: rst ignition settings
DISPLAY
This menu allows to regulate the brightness of the display. The possible settings range from OFF - 10 to 31.
Activating OFF, the back light of the display will go o after a preset delay.
The back light will go on as soon as a key is pressed or if an alarm should be triggered in the machine.
CONTROLS PROCEDURE
Press key 6 and SET POWER will appear.
Press key 2 several times until USER is displayed.
Press key 2 until DISPLAY.
Press keys 4-5 to select the brightness
Press key 6 to conrm and key 1 to return to the previous menus up to
the initial status.
OFF
1
2
3
4
5
6
OFF
1
2
3
4
5
6
RESET
Allows to reset all values modiable by the user back to the default values. The data are:
CONTROLS PROCEDURE
Press key 6 and SET POWER will appear.
Press key 2 several times until USER IS DISPLAYED.
Press key 2 until RESET.
Press keys 4-5 to select ON and press key 6.
"DONE" will appear on the display to conrm the command
SET H2O = 75°C
SET POWER = 5
ENABLE CHRONO = OFF
START PRG1=OFF
STOP PRG1 = OFF
MONDAY PRG1 = OFF
.......all chrono parameters OFF
PELLET = 00%
STAND BY = OFF
OTHER FUNCTIONS
AIR DISCHARGE
This function allows to bleed any air in the stove. Once the function has been activated, the pump indicator light is activated on
the display (for 15 minutes 30 seconds the pumps will be powered, alternating with 30 seconds of downtime).
To activate the function:
With the stove "OFF" press keys 1 and 4 at the same time, enter the password "77" using keys 4 and 5 and conrm with key 6.
Cut the power to interrupt.
FIRST LOAD
This function allows to activate the pellet feeding motor reducer for continuous functioning.
To activate the function:
When the stove is cold and "OFF" press keys 2 and 5 at the same time for a couple of seconds, the scrolling message “first
load” will appear on the display.
To interrupt continuous loading simply press key 1.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame LP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame LP20 in the language / languages: English as an attachment in your email.

The manual is 4.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame LP20

Extraflame LP20 User Manual - German - 40 pages

Extraflame LP20 User Manual - Dutch - 40 pages

Extraflame LP20 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info