811772
31
Zoom out
Zoom in
Previous page
1/40
Next page
31
| ENGLISH
USER MENU
SET CLOCK
see chapter: rst ignition settings
CONTROLS PROCEDURE
Press key 6 and SET POWER will appear
Press key 2 several times until SET ADJUSTMENTS is displayed
Conrm using key 6
Press key 2 until pellet IS DISPLAYED
Press 4 to increase the load and 5 to decrease it
Press key 6 to conrm and key 1 to return to the previous menus
up to the initial status
NO FUEL:
the stove can never develop a suitable ame, tending to remain very low even at high powers.
at minimum power the stove tends to almost switch-o taking the stove into NO PELLETS alarm condition.
when the stove displays the NO PELLETS alarm, there may be non-burned pellets inside the burn pot.
EXCESS FUEL:
the stove develops a very high ame even at low power.
the panoramic glass is very dirty, obscuring it almost totally.
the burn pot tends to become encrusted, blocking the holes for air intake due to the excessive pellet feed, as it is only
burned partially.
The regulation to be performed is a percentage. Therefore a modication of this parameter will lead to a proportional
variation of all stove feeding speeds.
Feeding is from -30% to +20%.
Follow the procedure on the display to perform this adjustment:
CHRONO
The chrono allows to program 4 time spans within a day to use every day of the week.
The switch-on and switch-o time can be set in every time span, along with the
days of use of the programmed time span and the desired water temperature (65
- 80°C).
RECOMMENDATIONS EXAMPLE
The ignition and switch-o times must be within the arc of
one day, from 0 to 24 and not over several days.
Before using the chrono function, set the current day and
time. Therefore check that the points listed in the “Set clock
sub-chapter have been followed, so that the chrono function
works. Aside from programming it, activate it as well.
Switch-on time 07:00 CORRECT
Switch-o time 18:00
Switch-on time 22:00 INCORRECT
Switch-o time 05:00
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame LP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame LP20 in the language / languages: English as an attachment in your email.

The manual is 4.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame LP20

Extraflame LP20 User Manual - German - 40 pages

Extraflame LP20 User Manual - Dutch - 40 pages

Extraflame LP20 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info