811762
21
Zoom out
Zoom in
Previous page
1/36
Next page
21ENGLISH
J
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, THE RELATIVE ICON WILL BE SHOWN ON THE RADIO CONTROL
DISPLAY
CHRONO
This function allows stove ignition and switch-o to be automatically programmed.
The factory setting for CHRONO is o.
The chrono allows the programming of 4 time slots per day, which can be used every day of the week.
In each time slot, it is possible to set
the ignition and switch-o times, the days of use of the programmed time slot, the desired temperature (if AUTOMATIC mode is
used) and the set power. Current day and time settings are essential for the correct operation of the Chrono.
Recommendations
Before using the chrono function, it is necessary to set the current day and time. Therefore, check that the points in the sub-section
DATETIME have been followed. To use the chrono function correctly, it must not only be programmed, but also enabled. The 4 time
slots can be overlapped using the ignition and switch-o time settings. In this way, it is possible to create a combination of time slots
with dierent temperatures and power levels, without changing the status of the stove.
N.B.: in the case of overlapping time slots, the stove will remain on until the last switch-o time.
ENABLING
Allows the chrono and the dierent stove time slots to be enabled/disabled.
To set: OK > CHRONO > ENABLING
CHRONO MODE
It allows the user to choose in which MODE (see paragraph) the stove will be switched on in the set time slots, choosing between:
MANUAL
AUTOMATIC
AUX
PRG 14
Prg x allows you to set the ignition and switch-o time, the days of use of the programmed time slot, the temperature and also the desired
power. Current day and time settings are essential for the correct operation of the Chrono.
To set: OK > CHRONO > PRGX
CHRONO >ENABLING >PRG 1 ON/OFF Enable/disable PRG 1
>
PRG 2 ON/OFF Enable/disable PRG 2
>
PRG 3 ON/OFF Enable/disable PRG 3
>
PRG 4 ON/OFF Enable/disable PRG 4
>
CHRONO MODE >MANUAL/AUTOMATIC/AUX -Set Chrono mode
>
PRG1 >START PRG1 OFF-00:00-23:50 Ignition time PRG1
>
STOP PRG1 OFF-00:00-23:50 Switch-o time PRG1
>
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG1
>
*SET PRG1 07- 37 °C Set thermostat PRG1
>
POWER PRG1 1-5 Set power PRG1
>
PRG2 >START PRG2 OFF-00:00-23:50 Ignition time PRG2
>
STOP PRG2 OFF-00:00-23:50 Switch-o time PRG2
>
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG2
>
*SET PRG2 07- 37 °C Set thermostat PRG2
>
POWE PRG2 1-5 Set power PRG2
>
PRG3 >START PRG3 OFF-00:00-23:50 Ignition time PRG3
>
STOP PRG3 OFF-00:00-23:50 Switch-o time PRG3
>
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG3
>
*SET PRG3 07- 37 °C Set thermostat PRG3
>
POWER PRG3 1-5 Set power PRG3
>
PRG4 >START PRG4 OFF-00:00-23:50 Ignition time PRG4
STOP PRG4 OFF-00:00-23:50 Switch-o time PRG4
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG4
*SET PRG4 07- 37 °C Set thermostat PRG4
*Only in AUTOMATIC mode POWER PRG4 1-5 Set power PRG4
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame KATIA 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame KATIA 9 in the language / languages: English as an attachment in your email.

The manual is 9.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame KATIA 9

Extraflame KATIA 9 User Manual - German - 36 pages

Extraflame KATIA 9 User Manual - Dutch - 36 pages

Extraflame KATIA 9 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info