643371
19
Zoom out
Zoom in
Previous page
1/36
Next page
L
19ENGLISH
RESET
Allows all values that can be modied by the user to be reset to the default values. The modied data is the following:
CONTROLS PROCEDURE
Press key 5 until SET CLOCK appears.
Press key 3 several times until USER appears.
Press key 5.
Press key 5 until "RESET" appears.
Use keys 2-3 to select ON and press key 5.
"DONE" will appear on the display to conrm.
COMFORT
This mode reduces the fan speed, making the stove quieter.
CONTROLS PROCEDURE
To activate, press key 4 until COMFORT ON appears on the display.
To de.activate, press key 4 until COMFORT OFF appears on the display.
(in certain models)
ENABLE CHRONO
It allows to enable/disable the chrono and the various time slots. When enabling the time slots, besides activating (ON) and de-activating
(OFF), it is also possible to select the COMFORT function for selected time slots.
CONTROLS PROCEDURE
press key 5 for a few seconds, until SET CLOCK appears.
Press key 3 several times to reach ENABLE CHRONO.
Press key 5, to conrm and use keys 2-3 to enable "ON" or disable "OFF" the chrono.
Use keys 4 -5 to select the desired time slot.
Press keys 2 - 3 to enable "ON" or disable "OFF" the COMFORT mode for the selected time slot.
Press key 1 several times to conrm and exit the menu.
J
WHEN THE COMFORT MODE IS ACTIVE THE LED FOR FAN 1 WILL FLASH ON THE CONTROL PANEL.
WHEN THE COMFORT FUNCTION IS ACTIVATED USING KEY 4, THE STOVE WILL ALWAYS OPERATE AT REDUCED FAN
SPEED!
CHRONO
The chrono allows to program 2 time spans within a day to use every day of the week.
The switch-on and switch-o time can be set in every time slot, along with the days of use of
the programmed time slot.
RECOMMENDATIONS
The ignition and switch-o times must be within the arc of one day,
from 0 to 24 and not over several days:
Before using the chrono function, set the current day and time.
Therefore check that the points listed in the Set clock sub-chapter
have been followed, so that the chrono function works. Aside from
programming it, it must also be activated.
Example:
Switch-on time 07:00 CORRECT
Switch-o time 18:00
switch-on time 22:00 INCORRECT
Switch-o time 05:00
19


Need help? Post your question in this forum.

Forumrules
1

Forum

extraflame-giusy-plus

Reset search

  • Hallo Zusammen,

    ich habe einen Extraflame Guisy .
    Im Display wird eine Fehlermeldung "Luftmengensensor ho" angezeigt.
    wie kann ich das beheben??
    In der Bedienungsanleitung finde ich keine Einstellung dazu.
    Submitted on 18-10-2021 at 08:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Giusy Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Giusy Plus in the language / languages: English as an attachment in your email.

The manual is 6,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Giusy Plus

Extraflame Giusy Plus User Manual - German - 28 pages

Extraflame Giusy Plus User Manual - Dutch - 28 pages

Extraflame Giusy Plus User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info