811730
27
Zoom out
Zoom in
Previous page
1/40
Next page
27ENGLISH
SETTINGS
• DATETIME
• LANGUAGE
• SET DEGREES
SEE CHAPTER: FIRST IGNITION SETTINGS
STAND BY
The Stby function is used in the event the stove needs to turn o immediately or modulation via additional thermostat. STBY will be seen
on the display, which indicates that the function is active.
To set: OK > SETTINGS > STAND BY.
J
THIS FUNCTION IS NOT RECOMMENDED FOR ENVIRONMENTS WITH SCARCE THERMAL INSULATION OR WHERE THERE
MAY BE SHARP FLUCTUATIONS IN TEMPERATURE: DOORS OR WINDOWS CONSTANTLY OPENED.
FIRST LOAD
This function allows the auger to be lled, thus facilitating rst stove ignition phases, or in the event the pellet hopper is empty.
With the stove cold and "OFF", make sure the pellets have been introduced inside the hopper and activate the FIRST LOAD function, then
conrm by pressing OK.
To interrupt continuous loading, simply press the key
OK
for 3 seconds.
To set: OK > SETTINGS > FIRST LOAD.
J
ALWAYS REMEMBER TO EMPTY THE BURN POT COMPLETELY BEFORE IGNITION AND MAKE SURE THAT THE BURN POT
HOLES ARE ALL CLEAR. NEVER EMPTY THE BURN POT INSIDE THE PELLET HOPPER, FIRE RISK!
OUTLET AIR
This function allows any air in the stove to be discharged. By activating the pump function, it will be powered alternatively with 30 second
work phases and 30 second stop phases for 15 minutes. With the stove cold and "OFF", activate the OUTLET AIR function, conrming with
OK. To interrupt, simply press the key
OK
for 3 seconds.
To set: OK > SETTINGS > OUTLET AIR
Warning: before activating the "OUTLET AIR" function, be sure to have opened the vent screw of the manual relief valve.
CLEANING
This function allows to open the burn pot base, facilitating the combustion chamber cleaning operations.
With the stove cold and switched "OFF", activate the CLEANING function.
Once the burn pot bottom has been opened completely, scrape the walls of the combustion chamber using the special tool supplied and let
the residual ash drop into the ash drawer.
To set: OK > SETTINGS > CLEANING
Once the cleaning operation has been completed, close the re door and press the
key for 3 seconds to nish and wait for the main
screen to reappear.
OPEN THE DOOR ONLY WHEN THE OPERATION IS COMPLETE! THE DISPLAY WILL INDICATE THAT THE DOOR HAS BEEN OPENED!
DISPLAY
The "DISPLAY" menu allows:
Adjustment of Display contrast.
Activation/Deactivation of backlight.
Enabling/disabling of acoustic signal.
Setting of the timer to turn o the Display backlight
.
Setting of the timer to turn o the Display (sleep mode).
To set: OK > SETTINGS > DISPLAY.
SETTING THE SHORT TIME PROMOTES BATTERY LIFE
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame EVELYNE IDRO 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame EVELYNE IDRO 2.0 in the language / languages: English as an attachment in your email.

The manual is 10.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame EVELYNE IDRO 2.0

Extraflame EVELYNE IDRO 2.0 User Manual - German - 40 pages

Extraflame EVELYNE IDRO 2.0 User Manual - Dutch - 40 pages

Extraflame EVELYNE IDRO 2.0 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info