Allows the user to reset all editable values to the default values.
To set: OK > SETTINGS > RESET.
EASY CONTROL
The function allows for two values to be set:
OFF (disabled - factory default)
ON (enabled)
Activation (EASY CONTROL = ON) is recommended in the event that there is an excessive formation of combustion residues in the ue
during operation at reduced power (see FLUE EXHAUST chapter).
Caution! It is advisable to activate the EASY CONTROL function under the supervision of a qualied technician.
To set: OK > SETTINGS > EASY CONTROL.
OPERATION AND SOLUTIONS
The Wi-Fi module identies the operation status using the green “Wi-Fi” LED. The table below shows how to interpret the information provided
and the solutions to implement
WIFI
Allows you to change the settings for the Wi-Fi module integrated in the emergency console.
The stove is equipped with a Wi-Fi module built into the emergency console and it has a “Wi-Fi” LED specically dedicated to the monitoring
and diagnostics of the Wi-Fi function.
The entire Wi-Fi interface is grouped under the Settings -> W-Fi menu
The conguration must be made using the Total Control 3.0 App, which can be downloaded from Play Store or Apple Store.
https://www.lanordica-extraame.com
RESET
The setting allows you to reset the Wi-Fi to factory settings
To set: OK > SETTINGS > WIFI > RESET > OK
WPS
The setting allows for the Wi-Fi module to be connected to the home router without having to enter the password. However, for correct
operation, it is necessary to register the product via the Total Control 3.0 App.
Once the WPS is activated, the Wi-Fi module will wait to receive the Wi-Fi conguration directly from the home router. The router, which must
be set up for this feature, usually has a WPS button to press.
To set: OK > SETTINGS > WIFI >WPS > ON
INFO
Three pieces of information about the Wi-Fi function are available in this menu.
To set: OK > SETTINGS > WIFI > INFO
- MAC: Unique identication code of the Wi-Fi device
- STATUS: Wi-Fi module status; it can have the following values:
SERIAL KO: no communication between Wi-Fi module and stove board
DISCONNECTED: The Wi-Fi module is not congured for internet access
STATION OK: The Wi-Fi module is connected to the home router, but has no access to the cloud (e.g. no Internet access, rewall issues)
CLOUD OK: The Wi-Fi module is connected to the cloud
The rmware revision number of the Wi-Fi module is also indicated.
- RSSI: Wi-Fi signal strength, when it is correctly connected to an access point
The RSSI value is expressed in decibels (dB) as a negative number which is typically in the range between -60dB (excellent signal) and -85dB (very poor
signal). If the signal is poor, we recommend purchasing a Wi-Fi repeater to avoid any connectivity problems
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Extraflame EVELYNE IDRO 2.0 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Extraflame EVELYNE IDRO 2.0 in the language / languages: English as an attachment in your email.
The manual is 10.18 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
