696227
21
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH
FRONT AIR
From the menu, it is possible to adjust the speed (-2, -1, 0, +1, +2) of the front fan.
To adjust the speed : OK > FRONT AIR > SPEED
DUCTING
From the menu, it is possible to enable/disable and adjust
the ducting speed (-2, -1, 0, +1, +2).
To enable: OK > DUCTING > ENABLE
To adjust the speed : OK > DUCTING > SPEED
EASY SETUP
The volumetric pellet weight is the ratio between the pellet weight and pellet volume. This ratio
may change without altering pellet quality. By using the EASY SETUP function, it is possible to
change the calibration of the volumetric weight by increasing or decreasing the preset values.
In the stove program, the available values go from “– 3” to “+ 3”; all stoves are calibrated in production
with the optimal value, which is 0
If you notice an excessive deposit in the burn pot, access the EASY SETUP program and lower the value by one unit to “- 1”; then wait
until the next day and if there is no improvement, decrease again, to a maximum of “- 3”. If on the other hand the volumetric pellet weight
calibration needs to be increased, change the value from the factory setting of “0” to “+1, +2, +3” as required.
To set: OK > EASY SETUP
EXCESSIVE PELLET DEPOSIT IN BURN POT
NORMAL
FUNCTIONING
LOW PELLET DEPOSIT IN BURN POT
-3 -2 -1 0 +1 +2 +3
THIRD DECREASE
RANGE IF THE
FIRST TWO ARE
INSUFFICIENT
SECOND
DECREASE
RANGE IF
THE FIRST IS
INSUFFICIENT
FIRST DECREASE
RANGE (TEST FOR
1 DAY )
OPTIMAL FACTORY
VALUE
FIRST INCREASE
RANGE
SECOND
INCREASE RANGE
IF THE FIRST IS
INSUFFICIENT
THIRD INCREASE
RANGE IF THE
FIRST TWO ARE
INSUFFICIENT
N.B.: If this calibration does not rectify the pellet deposit level in the burn pot, contact your local after-sales service centre.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Angela SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Angela SP in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Angela SP

Extraflame Angela SP User Manual - German - 36 pages

Extraflame Angela SP User Manual - Dutch - 36 pages

Extraflame Angela SP User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info