696227

Extraflame Angela SP Manual

20
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH
IGNITION
Once the previously listed points have been checked, press the key
OK
for three seconds until the stove lights up. During ignition, the stove
will check for a ame for a period of 15 minutes. Once the limit temperature has been reached, the stove interrupts the ignition phase and
switches to PREPARATION.
PREPARATION
During the preparation phase, the stove stabilises, progressively increasing combustion, before enabling ventilation and switching to WORK
WORK
In work mode, the stove works at the SET POWER dened by the user, heating the environment until reaching the SET THERMOSTAT. See
next heading.
REGULATION OF SET THERMOSTAT
The room SET THERMOSTAT can be set using buttons 2 and 3, from LOWTA - 7°C - 40°C - HOT. If the value is between 07°C-40°C the stove
checks the room temperature using a probe incorporated in the handheld. Once the set temperature has been reached, the stove automatically
reduces the power, guaranteeing optimal comfort and reducing pellet consumption: this process is called “modulation”.
LOWTAHOT
If the SET THERMOSTAT is "LOWTA" (set below the limit of 7°) temperature control is entrusted to the supplementary thermostat contact.
The temperature probe incorporated into the handheld is thus ignored.
If the contact is open (satised), the stove will work at the minimum power level.
If the contact is closed (request), the stove will always work at the set power level.
If the setting is on “HOT” (set above 40°C) the stove will always and only work at the set power level, thus ignoring the external contact and
temperature probe.
REGULATION OF SET POWER
The set power has 5 operating levels. When the
OK
key is pressed, the set power is displayed, which can be edited using the keys
OK
or
OK
.
Power 1 = minimum level - Power 5 = maximum level.
Changes must be conrmed by pressing the key
OK
.
To set power 1 it is necessary to press and hold the key
OK
for 3 seconds.
AUTO BLOW
During the work phase and at regular intervals, the stove cleans the bun pot. This process is known as "AUTO BLOW".
When this function is activated, it is shown on the display with a message. During "AUTO BLOW" pellet loading is slowed and the fumes motor
speeds up.
At the end of cleaning, the stove returns to work mode in normal operating conditions.
SWITCHOFF
Press the
OK
key for three seconds.
Once this operation has been performed, the appliance automatically enters the switch-o phase, blocking the supply of pellets.
The fume extraction motor and the hot air ow motor will remain on until the stove temperature has dropped below the safety limit.
REIGNITION
The stove can be re-ignited only if the fumes temperature is less than the preset limit, and if the minimum safe time has passed.
FUNCTIONING AND LOGIC
20
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extraflame Angela SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extraflame Angela SP in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extraflame Angela SP

Extraflame Angela SP User Manual - German - 36 pages

Extraflame Angela SP User Manual - Dutch - 36 pages

Extraflame Angela SP User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info