598228

Extech MG302 Manual

12
Zoom out
Zoom in
Previous page
1/19
Next page
12 MG302-EU-EN V2.0 4/11
DISPLAY BACKLIGHT
Press the
key to switch the backlight on. The backlight will automatically switch off after the SET
time has expired. Press the EXIT button to exit the backlight on mode.
HOLD
The hold function freezes the reading in the display. Press the
HOLD
key momentarily to activate or
to exit the
HOLD
function.
PEAK HOLD
The Peak Hold function captures the peak AC or DC voltage or current. The meter can capture
negative or positive readings as fast as 1 millisecond in duration. Momentarily press the PEAK
button, “PEAK” and “MAX” will display in the left auxiliary display. MIN” will display in right auxiliary
display. The meter will update the dispay each time a greater value occurs. Press the EXIT button
to exit the PEAK HOLD mode. Auto Power Off feature will be disabled automatically in this mode.
DATA STORAGE
1. Set the function switch to the measurement function desired.
2. Press the STORE button to access the recording interval time set up function.
3. The auxiliary display on the left indicates 0000 S, which is the recording sample rate; use the +
& - buttons to select the desired sample rate (0 to 255 seconds)
4. Set the sample rate to 0000 S for manual recording. In this mode, each press of the STORE
button will save one measurement reading.
5. Set the sample rate (from 1 to 255 S) for automatic recording. In this mode, pressing the
STORE button will start data recording at the programmed sample rate.
6. The auxiliary display on the left indicates the current storage location (0000 to 9999). New
measurements will begin storing into the next available location.
7. Press and hold the STORE button for 2 seconds to enter the RECALL mode or press EXIT to
return to the normal operating mode.
DATA STORAGE RECALL
1. Press and hold the STORE button for two seconds (if not already done as instructed in step 7
in the above procedure) to enter the RECALL function.
2. The auxiliary display on the left will show XXXX (current storage location). The auxiliary display
on the right will show XXXX (number of storage locations used).
3. Use the + and - buttons to navigate the storage locations. The value for the selected location is
indicated in the main display.
4. Press the EXIT button to end the recall session.
CLEAR ALL DATA
1. From the OFF position, press and hold the RANGE button while turning the function switch to
any on position
2. Release the RANGE button. The memory has been cleared.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Extech MG302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Extech MG302 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Extech MG302

Extech MG302 User Manual - German - 19 pages

Extech MG302 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info