642849

Exquisit WA 6012 A plus Manual

38
Zoom out
Zoom in
Previous page
1/64
Next page
38
EN
sounds and “temperature value” stops to blink. Simultaneously, as the temperature is selected, electrical
power, water consumption, and washing duration accordantly are changed.
SELECTION OF THE DRUM SPEED DURING SPIN
After temperature selection, selection of the drum speed during spin (hereafter, “spinning speed”) of the
value below the stipulated speed by washing program is available. After the temperature selection in zone D
(in accordance with Fig. 3) has been confirmed, maximal value of RPM spin for the selected washing program
begins to blink. When RPM spin needs to be changed, turn the Knob. Digital values of RPM spin changes gra-
dually from maximal (depending on model and used program in accordance with Tables 1 and 4) to minimal:
“0” (spin is switched off ) at interval of 200 rpm. On selection of desired number of RPM spin, push the Knob:
sound signal sounds and “RPM spin value” stops to blink. Simultaneously, as the RMP spin is selected, electrical
power, water consumption, and washing duration are changed accordantly.
CAUTION! Drum RPM during interim spins, between main washing operations, is non-adjustable
and depends upon the selected program.
AUXILIARY MACHINE’S OPERATIONS
Possibility of auxiliary operation actuating depends upon washing program in accordance with Table 4
(operations uncompatible with the program are not highlighted). Next auxiliary operation indicators are
highlighted in zone I:
–soaking, –preliminary washing, –stop with water in the tank, –light press,
–additional rinse, –protection against kids, –delayed washing start time.
After RPM spin has been selected, selection of the auxiliary operations can be performed by pushing
the Knob. One of the auxiliary operation symbols starts to blink in zone I in accordance with Fig. 3. Switching
from one auxiliary operation to another starting to blink is performed by turning the Knob. On selection of
desired auxiliary operation, push the Knob. Symbol blinking stops. Every Knob pushing is accompanied by
sound signal. Simultaneously, as the auxiliary operation is selected, electrical power, water consumption,
and washing duration are changed accordantly.
Soaking is provided for the cotton items with high degree of soiling. The items are exposure in water
with detergent for a time up to 2 h (with periodical tumbling) and then wash in accordance with selected pro-
gram. Simultaneously, on selection of this operation, preliminary washing is switched on. Two relevant indicators
go on. Soaking activates after the pre washing has been completed, indicator of watering starts to blink.
This operation can be switched off by canceling, or cut in time. Thus, the Machine will start to run in
accordance with selected program.
Preliminary washing is provided for the cotton items with high degree of soiling. If this
operation is selected, the items are washed additionally in the water with detergent at the temperature
of 30 °С, thus qualitative soiling removal during main washing is assured.
Stop with water in the tank is used during washing of the items made of gossamers to protect
them against crumpling.
When this operation is selected, final spin cycle is excluded.
Light press is provided to reduce textile crumpling during washing and spin. Thus, subsequent
ironing is facilitated. Using this operation assures favorable washing mode and cautious spin with a minimal
number of wrinkles remaining after washing.
Additional rinse is provided for infants’ garments and garments of the persons allergic to dete-
rgents, or for washing in extremely soft water where the detergent is swilled out insufficiently.
When this operation is selected, one more rinsing is added in the program.
PROTECTION AGAINST KIDS is provided against accidental changes of the selected program
made by kids. When this operation is selected, all control buttons except the button become blocked.
Selection of this operation can be performed before washing start or within the process of washing. Switch
on the operation by turn and press the Knob or by simultaneous pressing the Knob and button for 3 s
till the signal sounds. Indicator on display will light up . On completion of the operation, indicator
blinks, thus, showing that the Machine couldn’t be shut down. To switch off the auxiliary operation, press
simultaneously the Knob and button and hold for 3 s. Indicator on display will fade.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Exquisit WA 6012 A plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Exquisit WA 6012 A plus in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info