677768

Expobar Office Manual

23
Zoom out
Zoom in
Previous page
1/50
Next page
• Cleaning of the espresso machine
21 English
18. Cleaning of the espresso machine
Remember, as to get the best performance from the machine, descale and cleaning are to be observed.
Disconnect the machine from the main supply prior to cleaning the machine. All the body exterior can be
cleaned with a damp cloth. Do not use abrasive or dissolvent products.
18.1. Cleaning of group
• Unlock & remove the porta filter from the group head.
• Place the blind filter membrane on the filter basket.
• Insert a sachet of detergent into the porta filter. You must use specific detergents for this kind of
cleaning, suitable for the cleaning of the group of espresso machines.
• Lock the porta filter into the group head.
• If you have a Pulser machine (no keypad) press the brew switch for 10 seconds, then release for 3
seconds; and then repeat again this action for at least five times more.
• If the machine is of the type Control, (it has keypad), activate the auto-cleaning cycle as follows:
Switch off the machine, then keep pressed the button “2 short coffees” and turn on the machine. Now you
can release the button; the auto-cleaning will automatically repeat a cleaning cycle.
Important: Once finished the cleaning process, remove the porta filter and run water through the group again
to rinse out all remains. Repeat the cleaning process without detergent once more for a perfect result.
“DO NOT MANIPULATE THE PORTA FILTER DURING THE AUTO - CLEANING PROCESS”.
• Cleaning the groups everyday with the filter membrane but without detergent is recommended.
• Cleaning the groups with the filter membrane and detergent is recommended once a week.
18.2. Cleaning of gasket & shower
When attaching the porta-filter filled with grinded coffee into the brewing group, left overs accumulate in the
closing surface. These remains if excessive can prevent a good closing between the porta-filter an the brewing
group. Moreover, these remains can even block the output of water through the group.
The solution for this is cleaning:
• Place on the filter basket the blind membrane filter, without detergent.
• Place the porta-filter in the brewing group, without attempting to close it. IT MUST BE LOOSE.
• Connect a continuous espresso (switching or selecting).
• Make an opening - closing movement of the porta in place, without closing it. Water will flow around
the porta filter, flowing through the closing surface, cleaning it. Be very careful, as this water is very hot,
and can cause burns.
18.3. Shower cleaning
With a scouring pad, whip the shower’s area
both interior, and exteriorly.
Blind Filter membrane
Blind filter Membrane
Detergent
Filter
basket
Showe
r
Closing Area with
grinded coffee remains
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Expobar Office at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Expobar Office in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info