499723
3
Zoom out
Zoom in
Previous page
1/12
Next page
Bella Barista
Nene Court, The Embankment,Wellingborough, Northants, NN8 1LD
Tel: 01933 273275
e-mail: claudettep@towability.com
© Bella Barista Page 3 of 12
Servicing this machine will be easy as all components are quite accessible, case removal is 5
screws, and the water tank platform (which may also need to be removed) has two screws
and a couple of hex screws (puzzling why they decided to use 2 hex screws?). There is little
potential for an inexperienced service engineer to damage the machine when removing the
case, the pump is quite accessible and pump replacement looks straightforward. The water
sensitive control board is mounted in the area least likely to be exposed to water during filling
the tank, or venting, as is the digital temperature controller.
There are no instructions regarding lifting the Expobar Brewtus II from the box and it is a bit
awkward. The best method is to lay the box on its side, slide the machine out in its
polystyrene shells and then flip it upright. It’s heavy and solid, but easily handled by one
person.
In summary; The Expobar Brewtus II is very nice machine for the domestic consumer to use,
easy for the reseller to support and maintain. It should provide years of reliable service with
the minimum of maintenance.
This is a machine that I expected a lot from and it did not disappoint. I can only say to
Expobar, well done you have done a great job on this machine (and I don’t praise these
companies lightly). I think for the competition to displace this machine or attack it’s market
would be extremely difficult. Expobar have the price right, the design right and it works really
well!
I even feel this machine is very good value for money, it’s not a cheap machine and for a
change I do think you are getting what you pay for. This is a subjective statement, but the
Expobar Brewtus II stands out amongst the crowd of prosumer machines.
The machine carries it’s electrical
rating sticker and serial number behind
the drip tray.
The vital statistics for this machine are quite conflicting (and in some cases
inaccurate) when reading various websites and supplied information, my most
accurate view from measurement, rating plate information and internal examination, is
as follows:
Dimensions all approx. (not including steam/water wands) W = 260mm, D =460mm
H=420mm
Heating elements are 1200W one in each boiler (but only one can be on at any one
time)
Each boiler has a capacity of approximately 1.5 litres.
Boilers are copper with brass ends
Weight is approximately 20kg
Pump in the test machine was an Ulka EX5 48W
Group is an E61 type group
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Expobar Brewtus II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Expobar Brewtus II in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info