USER & INSTALLATION MANUAL
___________________________________________________________________________
14
extended navigation & communication
ExNC
extended navigation & communication
ExNC
7 Programming the ExNC 101 during installation
Before you can use your ExNC 101 AIS class B transponder it needs to be
programmed with the individual information about your vessel, which will be
transmitted continuously and autonomously.
The static data comprises:
- Name of the vessel
- Call sign of the vessel
- MMSI number of the vessel
- Dimensions of the vessel
- Position of the GPS antenna
The software CD “ExNC 101 CONFIGURATOR*” is computing settings and re-
settings of your transponder. Your certified dealer will do the programming for you.
The settings are stored in an EEPROM and can be changed and/or deleted only by
the appropriate dealer. Loose of power do not influence the settings
*
The CONFIGURATOR uses components and source code developed by other companies or
groups. Microsoft .Net Framework: Copyright © 2005 Microsoft Corporation. All trademarks mentioned
in this document are the property of their respective owners.
7.1 Requirements
The “CONFIGURATOR” is designed to operate with Microsoft Windows XP and
above.
Recommended minimum system requirements are:
• Microsoft Windows XP
• At least one RS232 serial port (or USB to serial converter*)
* When using an USB to serial converter please ensure this is fully installed before proceeding.
This Configurator software uses the Microsoft .Net Framework. The Framework will
be automatically installed during setup of the CONFIGURATOR.
www.busse-yachtshop.de | info@busse-yachtshop.de