522121

ExNC 101 Manual

13
Zoom out
Zoom in
Previous page
1/22
Next page
USER & INSTALLATION MANUAL
___________________________________________________________________________
13
extended navigation & communication
ExNC
extended navigation & communication
ExNC
6.4.2 Data Connection
The power/data cable is a 15-pin D-type female connector with which you can
connect your ExNC 101 via RS 232 or RS 422 to an external display unit (e.g. chart
plotter, PC, ENC, ECDIS) visualizing other AIS units within range.
Please check with the supplier of your ECDIS, ENC or PC software and make sure
that the same is able to compute AIS data.
The software of your ExNC 101 delivers you automatically AIS data on the interface.
The baud rate is fixed to 38400 bps with 8 data bits, one stop bit and no parity. No
handshake is used. VDM, VDO, ACA, TXT messages conform to NMEA 0183.
6.4.3 Serial Port Input/Output
There are two serial ports provided. One is in RS 232 and one in RS 422 format
(optional). Data input can be done through both ports.
The serial port interface(s) output:
• As a VHF Data Link Message (VDM) all incoming VHF Data Link (VDL) data
received by your transponder.
• The VHF data link own vessel (VDO) messages sent by your transponder over
the VHF Data Link.
• AIS regional channel assignment messages (ACA) received. These are
derived from an incoming VHF Data Link message (message 22) or a DSC
message.
• Text messages (TXT).
www.busse-yachtshop.de | info@busse-yachtshop.de
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ExNC 101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ExNC 101 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info