The barbeque must be fully assembled before use. Only a medium size Philips screwdriver and a adjustable spanner is needed.
Open the carton and remove the parts (Note that the barbeque chassis assembly is heavy and will require at least 2 people to move). Remove all packaging (especially check inside
the barbeque and under the charcoal grid) and place parts on a clean surface. Check for any damage or missing parts (if found, contact your service department).
INCLUDED PARTS HUBTM
STEP 01
/ Take the Ø4mm spring washers (F03) and Ø4mm washers (F04) and place them onto
two M4x10mm screws (F01). Take the two lid hanging brackets (04) and t onto the
two M4x10mm screws (the legs of the brackets should hang around the screw heads).
Place the handle (02) on the inset side of the lid (03) and align the handle legs with the
two holes. Fix the lid hanging brackets to the bottom of the lid by screwing the screws
into the handle legs (take care that the hanging brackets are running parallel to the lid
shorter sides). Tighten fully. If assembled correctly, the lid will hang from the bracket at
the rear of the barbeque using the lid hanging brackets to hook it in place.
PACKAGING
Remove all internal cartons and packaging from within the barbeque assembly. Remove all external packaging and remove the appliance from the packaging base before operation.
Recycle as per your local government laws.
STEP 02
/ Rotate the barbeque chassis assembly (01) onto its rear panel and lay on a clean at
surface (the cardboard packaging is ideal). Fix the four legs (14, 15, 16 & 17) to the
bottom panel (castors to the left hand side) using sixteen M6 bolts (F02). Note that
when nished, the legs will angle out towards the corners.
STEP 03
/ Take the two Top Panel Covers (05) and place them over the end of the rotisserie poles
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Everdure Hub at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Everdure Hub in the language / languages: English as an attachment in your email.
The manual is 1.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
