798844
9
Zoom out
Zoom in
Previous page
1/13
Next page
1716 Assembly, Operation & Maintenance InstructionsAssembly, Operation & Maintenance Instructions
STEP 10
/ Place the pedestal pole (S02) into the pole support. Align the three inner holes and x together
using three M8x 25mm screws (F04). Fully tighten.
STEP 11
/ Place the pedestal pole cover (S03) over the pole and place on the pole support..
STEP 12
/ Place the pedestal top (S01) over the pole. Adjust the position of the pedestal top so it is
directly over the pedestalbase, align the three holes and x together using three M8x25mm
screws. Leave slightly loose.
STEP 13
/ To place the barbeque on the pedestal (when supplied), pick it up from the centre of the
bottom of the shorter sides, so that when placed on the pedestal top, hands are positioned in
the slots at the pedestal top sides. Always take care not to trap ngers under the barbeque. Do
not do when the barbeque is hot.
STEP 14
/ With the barbeque in a secure position, fully extend the power cord from the recess on the
right hand side (do not over-extend) and connect to your power supply.
*Due to ongoing design modications, support brackets may be permanently xed to the element
MAINTENANCE
It is recommended that, at the commencement of each barbeque season, the following
maintenance be conducted:
BARBEQUE
1. Wipe over the outer areas of the barbeque with a clean cloth.
2. Check all oils and ash has been cleaned from the charcoal chamber and under the
element.
3. Check all fasteners for tightness and re tighten where necessary to ensure rigidity of
the structure.
4. Check retractable power cord is operational and the cord/plug is undamaged.
PEDESTAL
1. Check all fasteners for tightness and re tighten where necessary to ensure rigidity of
the structure.
2. Wipe over barbeque pedestal with a clean cloth.
Wear and tear to this barbeque can be reduced by covering and storing out of the
weather when not in use.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everdure Fusion at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everdure Fusion in the language / languages: English as an attachment in your email.

The manual is 4.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info