643344
34
Zoom out
Zoom in
Previous page
1/44
Next page
11.1.The Stove Panel
There are two displays available with different sizes but the same functions.
11.1.1 Panel description.
1) Use this button to enter the working programme setting. During setting, press it to move to the next menu item or
increase the displayed value.
2) Use this button to enter the working temperature setting. During setting, press it to go back to the previous menu item or
decrease the displayed value.
3) TIMER LED: It is on when the programmer timer setting is enabled.
4) TEMP OK LED: It is on when the stove reaches the room temperature. The stove then continues the heating in ECO mode.
5) DISPLAY LED: It indicates the stove working status and the setting menu.
6) AUGER TUBE LED: It is on when the Auger tube is working.
7) IGN LED: It is on when the ignition plug is on.
8) ON/OFF: It is the stove switching on/off button. Keep it down for a few seconds to switch the stove on. Press it also to clear
the alarm displayed. During temperature setting, press it to enter the technical menu.
9) LED ON: It is on when the stove is switching on or heating. It flashes when the stove is in the cooling phase or error.
10) IR: Optional IR remote control sensor.
11) AL: It is on or flashes if the pressure switch or the safety thermostat were triggered.
11.2. User functions
The board automatically controls the stove working parameters. Users can manually switch the stove on or off and use
the advanced functions, such as the weekly programmer or the timer.
11.2.1 First ignition
Upon switching on the board, the display shows the resident software version and then the stove status (OFF in case of
first ignition).
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor SPV-M9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor SPV-M9 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eva Calor SPV-M9

Eva Calor SPV-M9 Usermanual and installation guide - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info