668834
22
Zoom out
Zoom in
Previous page
1/55
Next page
5.5.1 Indicative hydraulic diagram heating only (only for hydro and boiler
models)
5.6 External thermostat installation
Stove operation can be adjusted to any external room thermostat connected to the circuit board (see
electrical diagram). The thermostat connection is made using a 2x0.5 mm2 cable. This operation
should be performed by qualified personnel.
If you choose to use an external thermostat, set the room temperature value on the stove display to
the minimum (7°C).
At this point, the stove will be controlled by an external thermostat.
During the work phase, the external thermostat is closed. The stove works at the set power level. A
virtual LED will activate on the upper left of the display. If the thermostat opens, the stove goes to
minimum power level and the display shows the message "modulating". This modulation stops only
if the thermostat goes back to being closed. In this case, the stove will return to the power set by the
user, the display will show the message "modulating" and an indication of the set power level will
return.
5.7 Remote control
The remote control is supplied without a battery. Insert an A 23 12V battery, taking care not to
invert polarity (polarity is indicated on the remote control data sheet)
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eva Calor Hydro Slim 16 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eva Calor Hydro Slim 16 kW in the language / languages: English as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info