702545
37
Zoom out
Zoom in
Previous page
1/104
Next page
37
Press SET again and the display will show ; use the plus and minus buttons
to set the day: Monday = d1, Tuesday = d2, etc.
Finally, press to confirm the settings. The display will return to the mode it
was in before you set the day and time. Press SET to check the day and time.
Set the temperature:
Make sure the unit is switched on then press the plus or minus button; the
standard setting is “23”. Press the plus or minus button until you have reached
the required temperature (between 10°C and 35°C). Press OK to confirm the
setting. The display shows the set temperature and the power, for example:
For example, Wednesday, 09.30, heating on full power at 25°C:
If you have set the temperature, the unit selects the power required: full power
if it needs to heat the room by more than 2°C and low power if it needs to heat
the room by less than 2°C. Once the unit has reached the set temperature, the
heating element is switched off but the ventilator remains switched on for
another 30 minutes. This circulates the air in the room so that the unit can
sense whether the room is cooling down. The unit switches on again if the room
cools down to 2°C below the set temperature.
To turn the thermostat off, press the function button and select heating on
low or full power. The unit will now work continuously. You no longer see the
temperature on the display, which shows Fig. A or Fig. B. If the unit has been
running continuously for 12 hours, it will switch off automatically, cool down and
return to standby.
Set the weekly programme:
To set a weekly programme, you first need to set the date and time.
1. Make sure that the unit is in standby mode (S) (use the main switch).
2. Switch the unit on using the on/off button .
3. Press ; a “P” now appears in the display, which shows the weekly
programme screen (see Fig. D).
4. Press ; you now see “d1” on the display. Press “DAY” again to go to the
right day: d1 = Monday, d2 = Tuesday, etc. If you set the day to Monday, the
display will show Fig. E (flashing).
5. Press ; you will see P1 (programme 1) on the display. A maximum of six
programmes can be set per day: P1 to P6. Press “EDIT” again to go to P2, and
so on.If you set the programme to programme 1 (P1), the display will show
Fig. F (flashing).
6. Press ; the display will show “00”. Press “TIME/ON” to increase the start
time by one hour, from 0 to 23, e.g. 07.00 (see Fig. G).
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom WH2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom WH2018 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info