Overheating protection
The overheating protection system switches the unit off if it gets too hot. This will
happen if the unit is unable to get rid of enough heat or if it cannot take in enough
fresh air. Common reasons for this are that the unit has been partially or
completely covered, the intake/outlet roosters are blocked or the unit has been
placed too close to a wall. If the overheating protection is activated and the unit
switches off, the unit will start to ventilate to get rid of the extra heat. In this case,
the display does not change. Once the unit has cooled down, it will return to its
previous setting. We advise you to switch the unit off using the remote control and
to give it enough time to cool down. Once you have removed the cause of the
overheating, you can use the unit again as normal. If you cannot find the cause of
the overheating and the unit continues to overheat, you should turn the unit off and
return it for repair.
Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do
not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
Using a vacuum cleaner, carefully remove any dust and dirt from the grills and
ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if
possible. Store upright in a cool, dry and dust-free place.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
