591684
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
ASSEMBLY VTM12
Remove the rubber protection from the motor casing (i) and undo the three rear screws with
rings (f).
Place the back protective grille (e) with the handle at the top next to the motor casing and
tighten the three screws with rings (f).
Secure the fan turbine (b) with the fixing screw (c) to the motor axle.
Place the front protective grille (a) in front of the fan turbine. Screw both grille parts together
with the fixing screw (d) and secure them with the clip.
OPERATION
The fans can be set to three different speeds: 0=off, I=low, II=medium and III=high. Both types
of fan are equipped with an oscillation function (45°).
If
- the fan has been fully assembled
- all connections have been properly secured
- all safety guidelines have been taken into account
you can use the fan.
Insert the plug into the socket.
Choose the output using the power button: 0=off, I=low, II=medium and III=high. The fan will
now begin to work.
If required, depress the swivel button: the fan will now begin to oscillate through an angle of
45°. Depressing and releasing this button will turn the swivel function (or oscillation function)
off.
If you would like to angle the fan upwards or downwards, the motor block can be angled
further up or down in relation to the foot. Before doing so, however, turn off the fan and
remove the plug from the socket! Undo the black setting button slightly, set the fan to the
desired position and tighten the button.
In order to turn the fan off, set the power button to 0 (off). If you wish to turn the device off for
longer than just a few minutes, you must also remove the plug from the socket.
CLEANING AND MAINTENANCE
Switch the fan off and remove the plug from the socket if you wish to clean the device or
perform maintenance.
The fan only needs general, exterior maintenance. Dust it regularly with a soft cloth or duster or
use a vacuum cleaner with a soft brush to clean. If it is very dirty, open the grille and clean
grilles and blades using a soft, damp cloth and a mild household cleaning agent. Dry everything
thoroughly and allow the fan to dry properly before reassembling and using again. Ensure that
water does not come into contact with anything other than the grille and blades. Never rinse or
spray the fan!
In order to prevent material discolouration or deformities, never use aggressive or corrosive
(cleaning) products.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom VSM16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom VSM16 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info