591684
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
7 Remove the black ring and assembly bolt (D) from the motor axle (G).
8 Place the protective grille front (E) over the motor axle so that the holes in the grille go over
the buttons that stick out of the motor. Check to ensure that the protective grille (E) is properly
connected to the motor casing (J) and that the handle (F) is at the top. Secure the back
protective grille with the assembly nut (D). Turn clockwise to tighten.
9 Undo the screw on the protruding drum on the fan turbine (B) slightly. Slide the fan turbine
over the motor axle so that the screw falls into the recess on the motor. Tighten the screw.
10 Remove the small locking screw from the base of the front protective grille. Check to
ensure that the locking clips are open.
11 Slide the upper clip on the front grille over the upper side of the back grille so that both
parts of the grilles are locked together.
12 Now tighten the locking screw at the base of the two grilles. Finally, close the remaining
clips to complete assembly.
DIAGRAM OF COMPONENTS VTM12
a = protective grille front
b = fan turbine
c = fixing screw turbine
d = fixing screw grilles
e = protective grille back
f = screws grilles back
g = motor axle
h = swivel button
i = motor casing
j = power button
k electrical cable
l = setting button
m = grill clip
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom VSM16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom VSM16 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info