591712
21
Zoom out
Zoom in
Previous page
1/32
Next page
- 21 -
Step 6
6-5 Tilt the gas bottle container and allow it to rest on the
frame.
6-6 Close the pressure regulator on the gas bottle and screw
the fastener on securely with the adjustable monkey
wrench.
6-7 Place the gas bottle within the frame.
6-8 Let the container drop over the frame.
T = pressure regulator U = gas bottle
Your patio heater is now assembled.
In order to conduct a comprehensive leak test: cover the entire
gas ‘pathway’ with the soapy solution and check for leaks. Pay particular attention to connection points
and risky areas!
Only when you are 100% sure that there are no gas leaks can you use the patio heater.
Please refer to chapter: Checking for leaks.
LOCATION AND INSTALLATION
The patio heater is intended for outdoor use. Never use it in areas where this is a risk of explosion,
such as rooms where gas or other flammable substances are stored.
Make sure, at all times, that there is sufficient air ventilation.
Find a location a good distance away from flammable materials: keep a free space of at least 45 cm
on top and 60 cm at the sides.
Place the patio heater on a sturdy, stable, flat and horizontal surface.
In order to protect the patio heater in high winds, anchor it with pins into the ground or screw it into the
surface. The base of the patio heater has attachment points for this purpose. Pins/screws are not
supplied but must be suitable for the surface concerned.
GAS REQUIREMENTS
Only use propane or butane gas.
The maximum entry pressure on the gas regulator may not exceed 10 bar.
A minimum supply pressure of 28 mbar is required.
The gas regulator and hose must fulfil legal requirements.
The hose has to be 134 cm. long and the type EN1763-1-class 2-6:3-20bar propane / butane with
screwcoupling.
The installation must conform to legal guidelines for storage and use of liquid petroleum gases.
A dented, rusted or damaged bottle of gas could be dangerous and must be checked by the gas
supplier. Never use a gas bottle that has a damaged valve.
Never connect a gas tank that does not fulfil regulations to the patio heater!
CHECKING FOR GAS LEAKS
The connections on the patio heater are checked for leaks in the factory before shipping. In order to
make sure damage has not occurred during transport or as a result of high pressure, another complete
leak test must be carried out during installation.
Carry out the check with a full gas bottle.
Set the control button to OFF.
Make a soapy solution using one part liquid soap to one part water.
Apply the soap solution to the whole system, particularly the connections, using a spray bottle, brush
or cloth.
Open the gas supply. If there is a leak, you will see soap bubbles forming.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom THG12000 RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom THG12000 RVS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info