Manual Eurom SANICOMFORT 400 (page 19 of 52) (English, German, Dutch, French, Swedish)

667891

Zoom out

Zoom in

1/52

Description and Installation

1. Convector

2. Towel rail

3. ON/OFF switch with

control light

4. Control panel with

LCD-screen

5. Temperature display

6. + Button: 'temperature higher'

7. - Button: 'temperature lower'

8. Timer setting button

Remove all packaging material and keep out of reach of children. After removing packaging,

check the appliance for damage or other signs that could indicate a fault/defect/malfunction. In

case of doubt, do not use the appliance, but contact your vendor for inspection or replacement.

Do not use the heater before it has been installed in accordance with the following

instructions!

 Slide the 4 clips in front of the towel rail over both sides of the convector, 2 on the left and 2

on the right; ensure they are horizontal. Slide the towel rails over the clips and secure onto

the clips with the 4x2 nuts and bolts. The height of the rails can be adjusted later by

carefully sliding.

 Choose a solid, flat and completely vertical wall made of non-flammable and non-melting

material on which to mount the heater (i.e. no wood, synthetic materials, etc!)

 Decide where you want to mount the heater. Make sure that the heater has sufficient space

around it at all times and that no inflammable materials are located nearby (see also safety

instructions). Do not place the heater behind a door! The heater’s underside needs to be at

least 5 cm above the floor, the sides at least 20 cm from the side walls and the top at least

50 cm from the ceiling, ceiling beams, etcetera.

 Place the hanging support against the wall, short side with two brackets at the top, brackets

facing forwards. Now mark the location of the 5 screws. Make sure that the top two are

exactly horizontal!

 Drill the 5 holes and insert a plug into each.

 Screw the support securely to the wall

 Slide both the channels on the convector (at the top on the back) over the brackets and

check to ensure that the heater is horizontal and securely attached.

 Secure convector and support using the nut underneath by screwing the support to the

convector.

 Your heater is now ready for use.

Set-up and Operation

Make sure the heater is turned off (On/Off switch to O). Now plug into an earthed, correctly

functioning 220-240V / 50Hz socket. Only connect the heater to an earthed socket!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom SANICOMFORT 400 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom SANICOMFORT 400 Manual

Product: