591486
28
Zoom out
Zoom in
Previous page
1/48
Next page
28
PH2750C
Type PH2750C is fitted with an air sensor: a device that immediately measures the CO²
(carbon monoxide) in the room. This device will also automatically de-activate the heater if
you use the heater under abnormal conditions (poor ventilation or an insufficiently large
room).
If this occurs, do not try to reactivate your heater immediately. First ventilate thoroughly,
refresh the air and wait until the temperature in the room drops. Remove the cause of the de-
activation before using the heater again.
In this embodiment (PH2750C) is the flame height not adjustable.
A. THE INSTALLATION OF THE HEATER
1. UNPACKING
1. Open the cardboard packaging.
2. Take the heater and its accessories out of the box and remove the filler pieces on the
sides.
3. Open the protective grill (4 in diagram A) by holding it on the right side, lifting it and then
pulling it forwards. Take the burner out of the heater by first sliding the top cardboard filler
piece down and then removing it and then removing the bottom filler piece.
4. Put the burner back in place and ensure that it is positioned correctly. To do this, move
the metal spring that is fastened
under the burner back and forth
a few centimetres until the
burner is in the correct position
(diagram B).
5. Put the protective grill
back in position. Place the
vertical right in the top opening,
lift it up, push it and then allow it
to drop into the bottom opening.
6. Open the cover that provides access to the fuel tank (2 in diagram A) and remove the
filler piece that is under the cover.
7. Put all of the packaging components that you have removed back into the box and store
this in a dry place during the season when the heater
is in use.
8. Remove the screw from the cover of the battery
compartment on the back of the heater. Push the
cover upwards and pull it forward. Now place the
alkaline batteries (PH2750: 2 x D, 1,5V PH2750C:
4 x R14, 1,5V) with the + and poles as indicated.
Now close the cover again (Diagram C) and screw it
closed. Remove the batteries from the heater if they
are not being used for an extended period of time.
9. Check the de-activation system in the following way:
- Move the wick to the highest position with the aid of
the appropriate button (7 in diagram A).
Attention: This is not possible when the tank has been removed. This heater was
designed for temporary use the heater will not work if the tank is absent.
- press the stop button (8 in diagram A) in order to move the wick down again.
In order to ascertain that the wick has moved completely to the lowest position again, try
to turn the button (7 in diagram A) anti-clockwise. If this is not possible, this means that
the de-activation system is functioning correctly.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom PH2750C met CO2-detectie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom PH2750C met CO2-detectie in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info