510051
31
Zoom out
Zoom in
Previous page
1/52
Next page
31
The rotating wheel includes a brake; put this on when using this heater! If the
heater is placed on a slight incline, put a stone or something similar in front of the
wheels. Do not use the heater on a severe incline!
Working principle
Fuel system: The heater is equipped with a motor-driven, rotating fuel pump that
pushes fuel through the fuel pipes and onto the nozzle at a pressure of 7-12 kg/cm².
The nozzle then sprays the atomised fuel into the combustion chamber. The air fan
ensures that sufficient air is added.
Ignition mechanism: A transformer converts the mains network voltage into a high
voltage (16.5 kV) to create a spark in the sparkplug. This ignites the fuel in the
combustion chamber. The sparks stop after 20 seconds; combustion continues as
long as fuel is being added.
Air supply and cooling system: The heater requires a great deal of air (oxygen) for
the combustion process; the air fan regulates effective combustion. Too much air will
lead to a blue flame, too little will give a yellow one. Ineffective combustion can lead
to problems with ignition and soot and may create air that makes you feel nauseous.
If the combustion chamber gets too hot, the cooling and air fans will start to work in
order to prevent overheating.
Electrical system safeguard: This heater is fused in order to protect it against high
voltage. A spike in power or similar will burn the fuse. If the heater does not work,
always check the fuse in the PCB first.
Flame control: The heater is equipped with a photoelectric tube that seeks out the
flame and checks it for balanced combustion. If the flame goes out or burns unsafely,
the flame safeguard will stop combustion and an error message will then be sent to
the display.
Overheating safeguard This heater is equipped with an overheating safeguard that
checks for overheating during combustion. If the temperature in the heater (outside
the combustion chamber) rises above 80 to 100°C, an error message is sent to the
display.
Thermostat function: This heater has a built-in thermostat button which can be
used to set the target temperature. The heater will work until the set temperature is
reached (checked by the temperature sensor and shown on display). If the set
temperature is lower than the current temperature, the heater will not work.
Fuel
The fuel for this heater is paraffin or diesel; paraffin is preferable. In general, diesel
does provide heat but paraffin is cleaner and so the nozzle clogs up less quickly and
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom OK115T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom OK115T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info