Manual Eurom Oil panel heater 400 (page 16 of 44) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

591328

Zoom out

Zoom in

1/44

Assemble the swivel wheels and feet (see image ‘Description’):

 Remove the plastic cover caps from the metal brackets (4x)

 Remove the cap nut from the swivel wheels (4x)

 Stick the threaded part of the swivel wheels through the holes at the end of the metal

brackets (4x)

 Screw the cap nuts tightly onto the threaded part of the swivel wheels (4x)

 Place the plastic cover caps back on the metal brackets (4x)

 Slide the feet (brackets and swivel wheel) onto the base of the radiator so that the

radiator’s protruding screw holes fall into the central hole on the metal bracket. (2x)

 Secure the feet to the radiator with the short, thick screws (2x).

 Place the radiator upright; it is now ready for use.

 Choose a suitable location for the heater which is at least one metre away from any

obstructions, walls or inflammable materials (see also safety instructions).

 Make sure a functioning heater is always placed on a solid, flat and horizontal surface.

Never place it on a bed, couch, deep pile carpet etcetera!

 Check that the socket used is earthed and that it matches the power specified on the

heater’s type plate.

Warning: only use the heater if it is standing upright, with a secure base (as pictured on

the front of this booklet). Any other position is dangerous!

Mounted (secured to a wall):

Choose a solid, flat and completely vertical wall made of non-flammable and non-melting

material on which to mount the heater (i.e. no wood, synthetic materials, etc!)

 Decide where you want to mount the heater. Make sure that the heater has sufficient

space around it at all times and that no inflammable materials are located nearby (see

also safety instructions). Do not place the heater behind a door! The heater’s underside

needs to be at least 10 cm above the floor, the sides at least 30 cm from the side walls

and the top at least 100 cm from the ceiling, ceiling beams, etcetera.

 The radiator must be attached to the wall securely using the 2 large brackets, the 2

small brackets and the 2 clamp plates, see diagram.

Two people are required to carry out this task!

 First, decide where the lower brackets are to be

located. They must be horizontal to one another and

their recesses must fall into the screw holes on the

base of the radiator. Secure diagonally to the wall

with the key bolts supplied; 2 key bolts per bracket.

Allow the brackets to drop as far as they can over

the screws and then secure tightly.

 Now determine the location of the upper brackets. To

do so, place the heater in the channel of the lower

brackets, keep it perfectly upright and place the

smaller brackets directly above the lower brackets so

that the horizontal part of the bracket lies at the

same height as the top of the radiator. Remove the

radiator and mark the drill holes in the channel on

the brackets, as low as possible. Now secure the

upper brackets to the wall using the 4 plugs and the

4 long screws. Make sure that, with some force, the brackets can still be pushed

downwards.

 Now place the radiator in the lower brackets and place both clamp plates on the upper

brackets. Push the upper bracket and clamp plate as far as possible downwards,

allowing the top of the radiator to fall into the channel on the clamp plates. Remove the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Oil panel heater 400 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Oil panel heater 400 Manual

Product: