environmental influences come to close to the appliance. That can cause singe damage or
fire. Pay attention that they don’t cover or obstruct the appliance. That can cause damage or
fire!
Make sure that the cord not hangs over (sharp) edges, not makes strong curves, not can be
pulled along and not touches hot surfaces.
If the appliance, by whatever which reason, produces cracks or breaks, if you during the
operation establish imperfection or interruption, or if the aluminium casing, the front cover
surface or the cord or plug show flaws, discontinue the operation of the appliance and take
the plug from the socket.
If the appliance, the cord or the plug is damaged or shows imperfection, contact your
supplier, the manufacturer or a qualified service point. Do not try to repair the appliance by
yourself, to avoid a hazard. Repairs by unqualified persons or changing’s to the appliance
break the water tightness of the equipment and let expire the guarantee and the liability of the
manufacturer.
Turn off the appliance, remove the plug from the power outlet and let the appliance cool
down before you touch-, install-, dislocate-, clean- or maintain it. Always unplug the
equipment when not in use! Pull on the plug to remove from the socket, never pull on the
cord.
Do not store any burnable liquids or materials like paint, petrol, gas tanks etc. in the
immediate surroundings of the appliance. Don’t use the appliance in flammable ambience,
such as near by combustible gastanks, gastubes or spray cans. Danger of explosion and fire!
Never insert fingers, pencils or whatever which object into the openings of the appliance!
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Keep out of reach of children and never leave them unsupervised with the appliance.
Consequently, when selecting the location for your machine, do so in such way that children
do not have access to the appliance. Keep children supervised not to play with the appliance.
Caution! Never leave the appliance unsupervised when in use, but switch it off and unplug..
Do not use the appliance with a programmer, timer or any other device that switches the
appliance on automatically. Also do not use the appliance with an external voltage regulator
such as dimmer, speed controller etc. That produces hazard too!
The appliance must only be mounted by an authorised specialist, paying attention to the
relevant regulations.
INSTALLATION
The EUROM GOLDEN COMFORT infra red heater encloses three parts:
- the real heater with cord, plug and connection piece
- the mounting bracket with dowels, screws etc.
- the remote control
Remove all package material and check the appliance, supply cord and the plug for signs of
damage.
Pay attention to the mounting place for your heater. The appliance has to be mounted on an
incombustible foundation. That foundation has to be vibrationfree, exact vertical and stable
enough for lastingly holding the appliance free of problems. Check or the provided dowels
and screws are suitable, strong enough and qualified for the foundation. The material
provided is identified for a brick wall; for another foundation please ask the specialist for
suitable material.
Check before mounting or the minimum safe mounting distances between heater and
environment are strictly followed. The distance between the bottom edge of the appliance
and the floor must be at least 2,5 meter. There must be a distance of at least 0,5 meter
