Manual Eurom Force 1420S wet dry (page 11 of 24) (English, German, Dutch, French)

591526

Zoom out

Zoom in

1/24

CLEANING UP

Switch the device off and remove the plug from the

socket. Wind the electrical cable around the cable hanger;

the upper section provides a groove into which you can

wedge the plug. Place the accessories at the appropriate

locations behind the device, see image.

CLEANING AND MAINTENANCE

Before cleaning or maintenance: always switch off the equipment and unplug it.

Filter cleaning system

When you feel that the suction is

getting weaker, please remove the

tube and jam the hose by hand

(while the equipment is working).

Then press the filter cleaning button

10-15 times: this will clean the filter

and recover the suction force.

Emptying barrel

Open both the locking blocks (4) en take the up

housing from the vacuum cleaner. Remove the

dust out of the barrel and clean the barrel if

necessary. At the end, place back the up housing

and close the locking blocks.

Cleaning the filter

Clean the filter regularly. Open both clips and remove the

lid of the vacuum cleaner. Slide the HEPA filter off the

frame and carefully wash with lukewarm water. Do not use

any aggressive or abrasive cleaning agents!

Let the filter dry thoroughly before replacing. Never use

the device without a filter!

Maintenance:

 Keep the body of the device, the filter and accessories clean and regularly check to

ensure no excess air is being sucked in.

 Check the cable and plug regularly for damage. Do not use the device if it has a

damaged cable and/or plug but take it to an authorised engineer to be replaced!

 Regularly check to ensure no objects are stuck in the suction mouth, hose or pipe.

Remove them if necessary.

 Use the device carefully; ensure it does not fall, bump into other objects or become

otherwise damaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Force 1420S wet dry in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Force 1420S wet dry Manual

Product: