591526
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
OPERATION
Put the hose connection in the machine;
if necessary, turn it a bit till the narrow
part is in total in the machine. Then turn
it as far as possible clockwise.
After this, connect the accessories you
wish with a twisting force, see picture.
You can adjust the telescope tube by
pushing the sliding block 2A down and
and tracking/pushing the lowest tube to
the length you wish.
Insert the plug into the socket.
Press the switch on/off to I to turn on.
You can adjust the airflow by pushing the sliding block
1B up and down.
If necessary, due to the surface and task, the hair or
rubber strips can be removed from the suction mouth. In order to do so, slide the
discs on the suction mouth outwards, take the strip holder from the suction mouth,
slide the excess strip out and replace the holder. If you wish to vacuum with double
hair or rubber strips, your supplier can provide extra strips and strip holders.
For the vacuuming of liquid the motor (which is situated in the cap) is provided with a
floater that is hanging under the motor, in the barrel. For the vacuuming of dry dirt
and dust the motor is provided with a filter that the floater surrounds and in that way
prevents that dust enters the mechanic system. Do you want to vacuum liquid,
remove than the filter by opening the locking blocks, to lift and turn the cap and to
slide the filter from from the floaters frame. Now you can remove the filter. Bring the
cap back in its position and close the blocks.
Be carefull!
Never vacuum dust without the filter around the floater!
Never vacuum liquid with the filter around the floater!
Socket
In order to use the socket, you must lift the lid and insert the plug into the socket. Then
use the ON/OFF switch to select the appropriate setting:
I = device works, power from socket
O = device off, power to socket (max. 1800W)
II = Power to socket, connected device will work. After 5-8 seconds the vacuum
clean will start. If the connected device is switched off, the vacuum cleaner will also stop
after 5-8 seconds.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Force 1420S wet dry at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Force 1420S wet dry in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info