Manual Eurom BK2003 (page 13 of 20) (English, German, Dutch, French)

474865

Zoom out

Zoom in

1/20

1= large screw

2 = attachment bracket

3 = plug

4 = small screw

5 = screw holes

Set-up and Operation

 Check if the mode selector dial is set to 'OFF' (O).

 Fully extend the power cord and plug into a suitable 220-240V socket. To prevent the circuit overloading,

check that no other appliances are connected to the same group.

 Switch the heater on by turning the mode selector dial to one of three positions; The pilot-light will turn on.

Fan only (thermostat to maximum)

I Heating at half power (1000W)

II Heating at full power (2000W)

It is most economical to heat the space at full power, then to switch to half power to maintain the

temperature.

 Both at half and full power, the fan rotates at the same speed; the difference between the two lies in the

number of heating elements in use.

 The thermostat serves to maintain a constant room temperature. To set the desired temperature, turn the

thermostat dial to its maximum position (clockwise as far as it goes). Set the mode selector dial to I or II.

Once the desired temperature is reached, turn the thermostat dial back slowly until you hear a click. This

causes the heater to switch off. The heater will now automatically switch on and off to maintain the set

temperature.

 To switch the heater off, set the power dial to ‘0’ (off). Unplug.

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it inadvertently falls

over. When the heater is returned to its upright position, it will resume functioning as normal but, before reusing,

switch off, unplug and check for damage. Do not use the heater if it is damaged or malfunctioning, but have it

inspected/repaired!

In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if the heater

cannot give off enough heat or if it cannot draw in enough fresh air. As mentioned above, this is generally caused

by (partially) covering the heater, obstructing the air intake and/or outlet grills or installing the heater too close to a

wall or something similar. When the overheating safeguard switches the heater off, set the mode selector dial to

‘0’ (off), unplug and allow the heater to cool down. Remove and/or amend the cause of overheating and reuse the

heater as normal. If you cannot find a cause and overheating recurs, stop using the heater, and take it in for

inspection/repair.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these

should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool

down before cleaning or carrying out maintenance work.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom BK2003 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom BK2003 Manual

Product: