701886
52
Zoom out
Zoom in
Previous page
1/160
Next page
52
subsequently, place it back. When you have connected
the separate thermostat, it automatically takes over the
thermostat operation.
Using the operating panel:
The operating panel (3) has 6 buttons:
MOD / SET / WEEK / + / - / ON-OFF
Press the ON/OFF button in order to switch the heater on. The display lights up
and the heater can be operated.
Now, set the day and time. Press and hold SET until SET appears on the screen.
The numbers of the weekdays (line 4) will blink. Use the + and buttons to find
the right day (1 Monday, 2 = Tuesday, etc.) and confirm with SET. The hour
will now blink. Use the + and buttons to set the right hour and confirm with
SET. The minutes will now blink. Use the + and buttons to set the right
minutes and confirm with SET. The day and time are now set.
Please Note:
o The day and time settings will be lost if the heater is switched off using the
main switch or plug; these will be retained if the ON/OFF button is used.
o If you do not set a time and day, the heater will assume that it is day 1 and
00.00.
o The screen goes off automatically after 2 minutes and can be turned on again
with any button.
Press MOD to set whether you wish to work with the M or P function.
Under the M-function, you use the + and buttons (remote control: with the bar
button) to set the capacity at which the heater will work: low, medium or high -
see technical details. The thermostat cannot be adjusted.
Under the P-function, you can use the + and buttons to set the desired
temperature for the heater, which it will then try to maintain. The heater will
automatically select the correct capacity: 1 or 2 degrees of heat = low, 3, 4 or 5
degrees of heat is medium and 6 or more degrees of heat is high. Once the
desired temperature is reached, the heater automatically turns off, and then
back on again when it cools down.
Under the P-function, you can also set the weekly timer. Pressing WEEK, allows
you to set or check the weekly timer. Please note! To set the weekly timer, you
must first enter the day and time correctly.
Setting weekly timer:
Press the WEEK button and hold it in. A blinking 01will now appear on the
display. Use the + and buttons to choose 01(one-off setting) or ][(the
setting your install will be implemented every week). Confirm with SET.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Alutherm 1000 WiFi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Alutherm 1000 WiFi in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info