755765

Eufy Smart Lock with Wi-Fi Bridge Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
15 English English 16
• Successfully calibrated: The button LED turns white for 2 seconds and then off.
The voice prompt “calibration complete” can be heard.
• Fail to calibrate: The button and status LED turn solid red for 2 seconds and then
off. The voice prompt “The deadbolt is stuck. Please return to the installation and
try again.” can be heard.
Note: If the eufy Security app fails to calibrate the lock, check whether the door has
been installed correctly and try again.
Set Access Code
After the lock is calibrated, the eufy Security app will prompt you to name your Smart
Lock and set an access code. Follow the on-screen instructions to complete the process.
The access code should be 4 to 8 characters.
Note: If you do not set the passcode and click “Return”, a message “initialization
unsuccessful” will appear. Click the card to enter the Smart Lock page. The
message “Continue or remove the device” will appear.
Set Scramble Passcode
A scramble passcode is a series of random numbers that you can input to prevent
others from spying on your actual access code. It is ideal for those living in a condo with
neighbors passing by all the time.
To set a scramble passcode, go to Settings on the eufy Security app. The scramble
passcode should be no more than 12 digits in total.
Example
Access Code: 123456
Scramble Passcode Method
1：
2：
3：
1 2 3 4 5 6 X X X X X X
X X X X X X 1 2 3 4 5 6
X X X 1 2 3 4 5 6 X X X
Other Settings
The Smart Lock supports many features that you can congure using the eufy Security
app. The features are listed as follows:
• Add up to 100 users
• Set language: English
• Synchronize time for lock with the time on your phone
• Customize voice volume for the Smart Lock
• Customize the time duration for automatic door-locking. You can set the
countdown duration to be up to 3 minutes.
• Enable or disable sound effect
• Automatically record door opening and locking log
• After 5 consecutive failed attempts to input the access code, access code cannot
be used.
• Check device information
OTA Update (Optional)
If your device requires an OTA update, the app will force you to update OTA. Follow the
onscreen instructions to complete the process. If no OTA update is required, the app will
automatically skip this process and enter “the setup complete” page.
Note:
• When the battery power level is lower than 20%, OTA update is not allowed.
• After OTA is successfully updated, wait for 1 minute and then reboot the
Smart Lock.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy Smart Lock with Wi-Fi Bridge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy Smart Lock with Wi-Fi Bridge in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info