783789
19
Zoom out
Zoom in
Previous page
1/160
Next page
34 35
English English
Problems Solutions
You cannot control
RoboVac with Amazon
Alexa.
Check if there are any Internet connection problems.
Check whether you have installed the Amazon Alexa
app onto your smart device and enabled “EufyHome -
RoboVac” Skill in the Amazon Alexa app. For details, refer
to the “Smart Integrations” page in the EufyHome App.
Make sure you have a EufyHome account and that it is
connected to RoboVac.
Make sure you are using correct Alexa voice-commands.
You cannot control
RoboVac with the
Google Assistant.
Check if there are any Internet connection problems.
Check if you have installed the Google Home app onto
your smart device and initiated the “EufyHome” action
in the Google Home app. For details, refer to the “Smart
Integrations” page in the EufyHome App.
Check if you are using the proper commands when
talking to the Google Assistant. When making your
request, first say the wake words “Ok Google”.
Repeat your question. Speak clearly to the Google
Assistant.
Voice Alert
When RoboVac encounters a problem, the red indicator on RoboVac will flash and you
will hear the relevant voice prompts.
The voice prompts below are only for reference and may be changed slightly after
voice pack updates. Please follow the voice prompts you have heard to find the cause
and solution below.
Voice Prompt Cause and Solution
Error 1: Front bumper stuck
If the front bumper is stuck, gently push the bumper in
repeatedly to dislodge anything trapped inside. If there
is nothing there, try moving the device to a new area
and restart.
Error 2: Wheel stuck. Check
the wheel and move it to a
new position
Wheel may be stuck or trapped. Clear any obstacles
in the surrounding area and check the wheel for any
trapped dust. Move the device to a new position and
try again.
Error 3: Side brush stuck Side brush may be stuck. Please clean it and try again.
Voice Prompt Cause and Solution
Error 4: Rolling brush stuck.
Remove and clean the
rolling brush
Remove the rolling brush, roller joint, roller brush cover,
and suction inlet to clean it. Once cleaned, place the
items back into the device and try again.
Error 5: Device trapped.
Clear the surrounding area
Device is trapped. Clear any obstacles in the
surrounding area and try again.
Error 6: Device trapped.
Reposition the device near
the area where the problem
occurred
Device may be suspended in air. Move it to a new
position close to the original position and try again. If
the device is still unable to start, clean the edge sensor
and try again.
Error 7: Wheel suspended.
Please move the device to a
new position
Wheels may be suspended in air. Move the device to
a flat surface and a new position close to the original
position then try again.
Error 8: Low battery,
shutting down device.
Please charge your device
Low Battery; system will shut down. Charge the device
and try again.
Error 9: Magnetic Boundary
Strip detected. Move device
to a different area
Device is too close to a strong magnetic field or strip.
Move the device to a different area and try again.
Error 12: Right wall sensor
needs cleaning
Clean the right side wall sensor since it's covered in
dust.
Error 13: Device tilted.
Please put the device on a
flat surface to start
Device may be tilted. Put the device on a flat surface
and try again.
Error 14: Please insert dust
collector and filter.
Put the dust collector and filter back in and confirm
that they are in place. Then restart the device.
Error 17: Virtual Boundary
detected. Move device to a
different area
Device is too close to the virtual boundary. Move the
device to a new position and try again.
Error 18: Laser cover may
be stuck
Pressure sensor for laser cover is stuck. Move the
device to a new position and try again.
Error 19: Laser sensor may
be stuck
Laser ranging sensor is covered in dust. Clean it and
try again.
Error 20: Laser sensor may
be blocked
Laser sensor is blocked by:
An empty environment
Metal mirrors
Or other multi-reflection devices
Remove any obstacles and move the device to a
different area.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac X8 - T2262 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac X8 - T2262 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 13.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info